CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

determine the right settings

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 17, 2011, 07:20
Default determine the right settings
  #1
New Member
 
Join Date: Feb 2011
Posts: 9
Rep Power: 6
Lombo is on a distinguished road
how i decide the time step?

my 2d problem const of a beam section (0.3m x 0.3m ) invested by a flow at 15 m/s. the domain along x axle is from -5 to 10 m and and from -4 to 4 along y axle.
i would like to investigate the oscillation of kolmogorov scale of vortex, so i made a mesh from 0.001 at the section to expand up to 0.150 at the boundary. i use a k-om sst unsteady model with a time step of 0.005, but the lift and drag plot are so bad..
Lombo is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
BC settings to expand pressure on atmosphere - simpleFoam / totalPressure sErik OpenFOAM Running, Solving & CFD 1 June 15, 2011 02:49
How to determine the location of the cell center zmester Main CFD Forum 0 October 11, 2009 06:58
determine wall-shear-stress Joeblue FLUENT 2 July 11, 2007 12:50
Default settings for 3D boundary layer-Gambit 2.2 Ramine FLUENT 1 July 31, 2006 12:36
help on memory settings in TASCflow Dr C.Bhasker CFX 1 September 5, 2001 05:57


All times are GMT -4. The time now is 09:25.