|
[Sponsors] |
Specifying the pressure values for the Fan characteristic curve |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 6, 2011, 01:36 |
Specifying the pressure values for the Fan characteristic curve
|
#1 |
Senior Member
---------
Join Date: Oct 2010
Posts: 303
Rep Power: 17 |
I'm totally new to FLUENT. I had a very newbie question in specifying the pressure values to the fan characteristic curve [using the Lumped parameter model].
From the user manual of FLUENT I found that - "All pressures that are specified and all pressures computed or reported by FLUENT are gauge pressures" and also that Absolute pressure = Operating pressure + gauge pressure. So could some one please tell me whether the pressure values that are specified for the characteristic curves of the fan are gauge pressures (or) absolute pressures
__________________
Best regards, Santhosh. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Unrealistic Pressure Values | mattyg88 | CFX | 9 | March 11, 2010 12:54 |
Gas pressure question | Dan Moskal | Main CFD Forum | 0 | October 24, 2002 22:02 |
pressure gradient term in low speed flow | Atit Koonsrisuk | Main CFD Forum | 2 | January 10, 2002 10:52 |
CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 12, 2001 23:19 |
Hydrostatic pressure in 2-phase flow modeling (long) | DS & HB | Main CFD Forum | 0 | January 8, 2000 15:00 |