Modeling of water sprays

Vijay · February 9, 2012, 17:45

Hello all: I am planning to model water sprays in ANSYS FLuent 13.0. Can fluent model water sprays by using default atomizers for example: Pressure Swirl Atomizer. I appreciate if any one help in this. Thank you in advance.

aeroboy · February 11, 2012, 07:29

Yes..you can model water spray with Fluent's in-built atomizer models

Vijay · February 11, 2012, 16:23

Quote:

Originally Posted by aeroboy

Yes..you can model water spray with Fluent's in-built atomizer models

Thank you for the reply. I did try model water sprays but I could not validate the pressure swirl atomizer. I have company manufactured data on spray characteristics.

February 9, 2012, 17:45	Modeling of water sprays	#1
Vijay New Member Vijay Join Date: Mar 2009 Posts: 14 Rep Power: 6	Hello all: I am planning to model water sprays in ANSYS FLuent 13.0. Can fluent model water sprays by using default atomizers for example: Pressure Swirl Atomizer. I appreciate if any one help in this. Thank you in advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Water subcooled boiling	Attesz	CFX	7	January 5, 2013 03:32
Water Evaporation and condensation modeling	Linjie	FLUENT	3	February 6, 2012 13:08
Water Evaporation and condensation modeling	Linjie	CFX	6	May 24, 2007 14:55
modeling the mixture of fresh and saline water	francisco tovar	CFX	3	April 19, 2005 12:44
uptodate water distribution network	fredius,magige,tanzanian,(e.a)	Main CFD Forum	0	January 27, 2002 07:10

February 11, 2012, 07:29		#2
aeroboy New Member Join Date: Feb 2012 Posts: 2 Rep Power: 0	Yes..you can model water spray with Fluent's in-built atomizer models