CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Hardware

First machine for simulations

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 8, 2012, 15:45
Default First machine for simulations
  #1
New Member
 
Join Date: Aug 2012
Posts: 15
Rep Power: 13
sweet_satan is on a distinguished road
This is my first post on this forum so hello to everyone

I'm not really specialist in cfd. I only did half year basic ansys CFX course, and half year Fluent curse during studies. But I'm really into it and i would like to get to know it better when i have more time.

Right now I'm trying to build kind of a workstation so I could use it for my master thesis (not sure about translation).
My experience tells me that you know best what you need when you really need it, so probably I'll know my needs after I start doing simulations. But...

I found this guy on internet selling xeon e5-4640 with motherboard Asrock X79 extreme4-M for only 2000 PLN, wich is about 500 euro.

I find it to be great occasion for me to buy cheap and good hardware to begin with.

Before i found this i was about to buy i7-3770K, so what should I do?
Also i read that I dont need ECC ram, but could someone confirm this so i could be sure.

Thanks for help in advance and also sorry for any mistakes (english is not my native language).
sweet_satan is offline   Reply With Quote

Old   August 8, 2012, 22:06
Default
  #2
Senior Member
 
Erik
Join Date: Feb 2011
Location: Earth (Land portion)
Posts: 1,162
Rep Power: 23
evcelica is on a distinguished road
What program will you be using?
Will you be running parallel cores? If so how many?
evcelica is offline   Reply With Quote

Old   August 9, 2012, 03:23
Default
  #3
New Member
 
Join Date: Aug 2012
Posts: 15
Rep Power: 13
sweet_satan is on a distinguished road
I'll be using Code Saturne as a solver. Also I want to try OpenFoam but i hear that it's complicated.
I would like to run computations on as many cores as possible to speed things up. But because of lack of experience I dont know yet how many I'll be able to use. Therefore I'm asking if I'll be able to utilize e5-4640 which is 8 cores with 2,4 GHz freq. Or should I go with more like gaming build with 3770K - 4 cores and 3,5 GHz freq. Price is the same (probably guy is selling engineering samples).

Last edited by sweet_satan; August 9, 2012 at 05:17.
sweet_satan is offline   Reply With Quote

Old   August 9, 2012, 09:59
Default
  #4
Senior Member
 
Erik
Join Date: Feb 2011
Location: Earth (Land portion)
Posts: 1,162
Rep Power: 23
evcelica is on a distinguished road
Well we don't know how many cores you will be running. If one, two, or three, then I'd say the 3770K might be faster. If more than that then the XEON may be faster.

You have 4 memory channels with the XEON, and only 2 with the 3770K. This may make a difference if the code you use is limited by memory bandwidth.

But it really depends on the code and your parallel capability. I don't know anything about Saturne, perhaps you should find out about parallel licensing for that code.
evcelica is offline   Reply With Quote

Old   August 16, 2012, 19:03
Default
  #5
Senior Member
 
atmcfd's Avatar
 
ATM
Join Date: May 2009
Location: United States
Posts: 104
Rep Power: 16
atmcfd is on a distinguished road
Quote:
Originally Posted by evcelica View Post
Well we don't know how many cores you will be running. If one, two, or three, then I'd say the 3770K might be faster. If more than that then the XEON may be faster.

You have 4 memory channels with the XEON, and only 2 with the 3770K. This may make a difference if the code you use is limited by memory bandwidth.

But it really depends on the code and your parallel capability. I don't know anything about Saturne, perhaps you should find out about parallel licensing for that code.
I agree with you. As for licensing, Code Saturne is open source, and hence it should'nt be a problem.
atmcfd is offline   Reply With Quote

Old   August 17, 2012, 00:28
Default
  #6
Member
 
Join Date: Jul 2011
Posts: 59
Rep Power: 14
rmh26 is on a distinguished road
Quote:
Originally Posted by sweet_satan View Post
I'll be using Code Saturne as a solver. Also I want to try OpenFoam but i hear that it's complicated.
I would like to run computations on as many cores as possible to speed things up. But because of lack of experience I dont know yet how many I'll be able to use. Therefore I'm asking if I'll be able to utilize e5-4640 which is 8 cores with 2,4 GHz freq. Or should I go with more like gaming build with 3770K - 4 cores and 3,5 GHz freq. Price is the same (probably guy is selling engineering samples).
The 3770k is $332 the E5-4640 is set up to run in quad processor machine and is $2725 so getting them at the same price seems strange, anyways I'm guessing the xeon will do better as it would has a higher theoretical performance (Gflops), and has 20 Mb of l3 cache vs 8 for the I7 as well as quad channel memory instead of dual. The extra memory and cache should help the code scale well.
rmh26 is offline   Reply With Quote

Old   August 17, 2012, 13:19
Default
  #7
New Member
 
Join Date: Aug 2012
Posts: 15
Rep Power: 13
sweet_satan is on a distinguished road
I bought xeon. Just like i thought it is ES processor, but seller is kinda keeping it a secret. He sold it with motherboard and installed cooler so I couldn't see writings on heatsink. It's sealed and i can't detach it or I'll lose warranty, which is 2 years by the way so I think its a good deal. Cooler he gave me is AVC Napoleon, not the best choice I think.
I also bought used quadro fx 4600 but it turned out to be bad idea. It uses a lot of power and came with broken capacitor. Seller repaired it but it looks like he didnt have a lot of soldering practice. Now I have problems on boot because sometimes card is not giving signal to monitor.
Thank you for all answers.
sweet_satan is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
general momentum source/hydraulic pressure jump/positive displacement machine ckleanth CFX 10 August 25, 2012 07:23
First CFD Machine: Some questions chimaera Hardware 3 June 15, 2012 17:39
ICEM crashing on 48 GB RAM machine beguxa ANSYS Meshing & Geometry 1 November 24, 2010 12:18
Distributed Parallel on dual core remote machine Justin CFX 1 February 3, 2008 18:23
PC vs. Workstation Tim Franke Main CFD Forum 5 September 29, 1999 16:01


All times are GMT -4. The time now is 06:46.