CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Guideline for hybrid mesh generation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 15, 2005, 11:32
Default Guideline for hybrid mesh generation
  #1
Sven Schmid
Guest
 
Posts: n/a
Hi,

I am looking for a guideline/book to get familiar with the basic issues of generating unstructured/hybrid CFD-meshes. I would appreciate any helpful reference. Thank you very much for your help!

Sven Schmid.
  Reply With Quote

Old   January 10, 2006, 09:31
Default Re: Guideline for hybrid mesh generation
  #2
vishal gupta
Guest
 
Posts: n/a
want to know about meshing in details specially hybrid mesh.
  Reply With Quote

Old   January 10, 2006, 09:31
Default Re: Guideline for hybrid mesh generation
  #3
vishal gupta
Guest
 
Posts: n/a
want to know about silver surfaces

  Reply With Quote

Old   January 14, 2006, 14:00
Default Re: Guideline for hybrid mesh generation
  #4
John Chawner
Guest
 
Posts: n/a
Try The Handbook of Grid Generation by Thompson, Soni, and Weatherill. It's available from most on-line booksellers.
  Reply With Quote

Old   January 16, 2006, 03:20
Default Re: Guideline for hybrid mesh generation
  #5
Sven Schmid
Guest
 
Posts: n/a
Dear John,

thank you very much for that hint, I will look for that book.

Best wishes,

Sven Schmid.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Negative volume error in hybrid mesh siw ANSYS Meshing & Geometry 4 September 3, 2014 05:25
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
mesh generation for in-cylinder fluent simulation hennas ANSYS Meshing & Geometry 2 May 31, 2011 15:08
Mesh generation software is needed H.Dou Main CFD Forum 12 May 4, 2011 15:20
mesh generation help mobius STAR-CCM+ 6 September 11, 2010 17:20


All times are GMT -4. The time now is 22:35.