Opinions on SimScale

Catthan · January 15, 2014, 10:25

Hi all,

SimScale, a cloud-based CAE (CFD) company-solver came to my attention.

I had a brief look and it looks like it can handle most basic tasks like compressible flow, rigid body motion, multiphase flow, acoustics etc.

The pricing seems reasonable too in my limited experience.

Has anybody used this?
Any thoughts?

Thanks,

W!ldejon · March 25, 2024, 05:21

Hi

Full disclosure first - I do work for SimScale. I had a LOT of questions before joining though, as I had only worked with traditional software until that point and a browser based solution seemed... different.

We've been around for 10 years now, focused on delivering simulation in a browser - it's a difficult industry to break in to but I think we've made great headway!

We started off leveraging open source solvers and now have partnerships to support multiple commercial codes behind the scenes.

Did you try it out? You can do for free.
I'd love to hear your feedback too, incase you would like to share it here or via PM

January 15, 2014, 10:25	Opinions on SimScale	#1
Catthan Member Join Date: May 2010 Posts: 57 Rep Power: 15	Hi all, SimScale, a cloud-based CAE (CFD) company-solver came to my attention. I had a brief look and it looks like it can handle most basic tasks like compressible flow, rigid body motion, multiphase flow, acoustics etc. The pricing seems reasonable too in my limited experience. Has anybody used this? Any thoughts? Thanks,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
opinions about FloEFD	unit22	Main CFD Forum	0	September 5, 2012 08:41
Switching Forum Software, Opinions Wanted	Jonas Larsson	Main CFD Forum	42	December 23, 2008 04:34
Switching Forum Software, Opinions Wanted	Jonas Larsson	Siemens	1	December 4, 2008 08:30
Switching Forum Software, Opinions Wanted	Jonas Larsson	FLOW-3D	0	November 29, 2008 06:18
Switching Forum Software, Opinions Wanted	Jonas Larsson	FloEFD, FloWorks & FloTHERM	0	November 29, 2008 06:18

March 25, 2024, 05:21		#2
W!ldejon New Member Jon Wilde Join Date: Dec 2016 Posts: 25 Rep Power: 9	Hi Full disclosure first - I do work for SimScale. I had a LOT of questions before joining though, as I had only worked with traditional software until that point and a browser based solution seemed... different. We've been around for 10 years now, focused on delivering simulation in a browser - it's a difficult industry to break in to but I think we've made great headway! We started off leveraging open source solvers and now have partnerships to support multiple commercial codes behind the scenes. Did you try it out? You can do for free. I'd love to hear your feedback too, incase you would like to share it here or via PM