CFD Online Logo CFD Online URL
Home > Forums > Main CFD Forum

johnson king turbulence model

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 16, 2007, 03:39
Default johnson king turbulence model
Posts: n/a
far field--------------------------------

| |

| |

-> | |

u | |

| |

wall ________________________________

just as the above,the gas flows from the left to the right ,and the below is solid wall,i used johnson King turbulence model,the left boundary condition is far field condition.can you tell me how the mammum stress gm=(U'V'm)^-0.5 to be obtained in the left condition?thank you

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding a Turbulence Model doug OpenFOAM Running, Solving & CFD 10 October 2, 2012 06:55
KOmega Turbulence model from wwwopenFOAMWikinet philippose OpenFOAM Running, Solving & CFD 30 August 4, 2010 10:26
question about turbulence model selection and sensitivity karananand Main CFD Forum 1 February 26, 2010 05:41
Centrifugal Pump and Turbulence Model Michiel CFX 12 January 25, 2010 04:20
v2-f turbulence model in CFX? flga CFX 14 November 23, 2006 07:12

All times are GMT -4. The time now is 17:35.