|June 11, 2007, 03:48||
Help needed with overset/chimera
I'm now trying to modify my code to allow overlapping grid ie overset/chimera capabilities.
I'm using fractional step FVM structured grid. I tried to simulate a 2d cylinder using o-grid overlapping with cartesian grid in external flow.
Using coarse grid, I managed to get a visually correct plot. Moving the o-grid at any position did not affect the solution.
When I used a refined grid, the solution blows up. On inspection, the problem happens at the interface. The velocity interpolated are in the wrong direction. Btw, I'm using bilinear interpolation.
I'm quite inexperienced with overset grid. Can someone recommend what I should do next to correct the problem?
|Thread||Thread Starter||Forum||Replies||Last Post|
|a CFD software is needed...||maxgzc||Main CFD Forum||3||September 27, 2011 01:51|
|Mesh generation software is needed||H.Dou||Main CFD Forum||12||May 4, 2011 15:20|
|urgent help needed (rhie-chow interpolation problem)||Ardalan||Main CFD Forum||2||March 18, 2011 16:22|
|a dissertation in ETD needed very much||LiQiang||Main CFD Forum||0||March 11, 2005 04:09|
|CFD Software Engineer needed in Fort Worth, Texas||Ross||Main CFD Forum||0||November 19, 2001 15:48|