 |
 |
 |
|
|
|
[Sponsors] | ||||
July 2, 2007, 02:26
|
Mesh generation
|
#1 |
|
Guest
Posts: n/a
|
I have been trying to generate a combustion mesh for a mexican hat piston with tappered edge,though i was successful but it happens that i had a lot of non-convex cells and cell inversion in my mesh ans its making it impossible for me to continue with my computation.Please can anyone give me a hand on this problem.Anxiously waiting for a reply.
|
|
|
||
|
July 2, 2007, 04:08
|
Re: Mesh generation
|
#2 |
|
Guest
Posts: n/a
|
Why not try ES-ICE from CD-adapco
|
|
|
|
||
|
July 2, 2007, 05:43
|
Re: Mesh generation
|
#3 |
|
Guest
Posts: n/a
|
Thank you very much for your contribution.I'm actually experiencing the difficulty (non-convex and inverted cell) using KIVA-3V (K3PREP) mesh generation program.Incase you have any advice towards this i will really be grateful.Thanks again for the response.
|
|
|
|
||
|
July 2, 2007, 09:23
|
Re: Mesh generation
|
#4 |
|
Guest
Posts: n/a
|
If you want to use GAMBIT I can help you.
|
|
|
|
||
|
July 2, 2007, 09:31
|
Re: Mesh generation
|
#5 |
|
Guest
Posts: n/a
|
I wouldn't mind,its just that i am not too familiar with GAMBIT.Also,i dont know if it can work with KIVA-3V main program.Please,enlighten more.Thank you and i wait for your response.
|
|
|
|
||
|
July 4, 2007, 11:52
|
Re: Mesh generation
|
#6 |
|
Guest
Posts: n/a
|
If you are using unstructured version of KIVA then GAMBIT is ok..If this is the case send me drawings of your geometry I will have a look and hope to generate the suitable grid for you.
|
|
|
|
||
|
July 6, 2007, 06:14
|
Re: Mesh generation
|
#7 |
|
Guest
Posts: n/a
|
Thanks alot.Can i have your email address,i will forward the file to you.
Thanks |
|
|
|
||
|
July 17, 2007, 06:18
|
Re: Mesh generation
|
#8 |
|
Guest
Posts: n/a
|
assalam ahmed
can you sent me you profil palse |
|
|
|
||
|
July 17, 2007, 18:44
|
Re: Mesh generation
|
#9 |
|
Guest
Posts: n/a
|
Albo, what do you mean?
|
|
|
|
||
|
August 2, 2007, 00:06
|
Re: Mesh generation
|
#10 |
|
Guest
Posts: n/a
|
bore 26.0 stroke 38.0 squish 1.55 thsect 360.0 nblocks 3
(x,y...-> 0.00000 2.30000, 0.40333 2.30000, 0.80666 2.30000, 1.21000 2.30000, 1.73416 2.10932, 2.25833 1.91864, 2.78250 1.72797, 3.30666 1.53729, 3.83083 1.34661, 4.35500 1.15594, 4.87916 0.96526, 5.40333 0.77450, 5.92750 0.58391, 6.45166 0.39323, 6.97583 0.20256, 7.50000 0.01188, 7.95000 0.00000, 8.40000 0.04256, 8.82121 0.16371, 9.32754 0.43470, 9.75482 0.81803, 10.07909 1.29232, 10.28129 1.82983, 10.35000 2.30000, 10.55000 2.50000, 9.83153 2.50000, 9.11307 2.50000, 8.39461 2.50000, 7.67615 2.50000, 6.95769 2.50000, 6.23923 2.50000, 5.52076 2.50000, 4.80230 2.50000, 4.08384 2.50000, 3.36538 2.50000, 2.64692 2.50000, 1.92846 2.50000, 1.21000 2.50000, 0.80666 2.50000, 0.04033 2.50000, 0.00000 2.50000, |
|
|
|
||
|
November 5, 2010, 08:57
|
How to decide NBO in iprep file
|
#11 |
|
New Member
shahid
Join Date: Oct 2010
Posts: 10
Rep Power: 4  |
Hi can any one guide me how to select NBO values. if it greater tahn 0, then how to decide i,j,x,y for all those points
Shahid |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [ICEM] Generating Mesh for STL Car in Windtunnel Simulation | tommymoose | ANSYS Meshing & Geometry | 48 | April 15, 2013 04:24 |
| 2D Mesh Generation Tutorial for GMSH | aeroslacker | Open Source Meshers: Gmsh, Netgen, CGNS, ... | 12 | January 19, 2012 03:52 |
| [ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM | kawamatt2 | ANSYS Meshing & Geometry | 17 | December 20, 2011 11:45 |
| mesh generation for in-cylinder fluent simulation | hennas | ANSYS Meshing & Geometry | 2 | May 31, 2011 15:08 |
| General questions on grid-based computing | Adrin Gharakhani | Main CFD Forum | 21 | June 5, 2000 13:47 |
Linear Mode
