 |
 |
 |
|
|
|
[Sponsors] | ||||
Thermoacoustic Simulation-UDF Pressure Inlet for standing wave |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 28, 2015, 06:32
|
Thermoacoustic Simulation-UDF Pressure Inlet for standing wave
|
#1 |
|
New Member
SDK123
Join Date: Sep 2014
Posts: 2
Rep Power: 0  |
I am simulating the thermo acoustic effect using Fluent. The basic principle is that we are providing the pressure inlet. We have placed the porous media in between the two ends. The other end is closed (reflecting wall). Because of the porous media temp difference is generated across the porous media.
I have two options 1)Run the simulation for 30min total time. The standing wave will form after @ 30 min experimentally. 2) or we can directly provide the standing wave as pressure inlet. What will be the UDF for the standing wave as inlet pressure? |
|
|
|
|
|
| Tags |
| fluent;compressible flow; |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| sonicFoam - pressure driven pipe: flow continuity violation and waveTransmissive BC | Endel | OpenFOAM Running, Solving & CFD | 3 | September 11, 2014 16:29 |
| UDF for time dependent pressure inlet | sirpolar | FLUENT | 0 | June 2, 2014 07:52 |
| Unsteady pressure differential between inlet and outlet of the pipe for single phase | joshi20h | FLUENT | 0 | September 26, 2012 12:41 |
| UDF for transient pressure inlet, mass flow check at nozzle exit and volumetric heat | kokoory | FLUENT | 0 | August 17, 2011 02:07 |
| Hydrostatic pressure in 2-phase flow modeling (long) | DS & HB | Main CFD Forum | 0 | January 8, 2000 15:00 |
Linear Mode
