CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

regarding in-cylinder flow problem?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 3, 2008, 17:00
Default regarding in-cylinder flow problem?
  #1
sarmech
Guest
 
Posts: n/a
hi, I am trying to mesh a 3D geometry of I.c.engine using Gambit,basically the geometry was constructed using Pro-e.WhenI tried to build mesh within the various volumes of inlet manifold and other geometries, i could not do,it.could any one guide me increating mesh for 3D in-cylinder problems.
  Reply With Quote

Old   September 4, 2008, 03:02
Default Re: regarding in-cylinder flow problem?
  #2
Balduin Bankerotti
Guest
 
Posts: n/a
http://www.adapco-online.com/adapco_...ice/index.html

http://www.adapco-online.com ==> Engine Modelling

  Reply With Quote

Old   September 4, 2008, 04:18
Default Re: regarding in-cylinder flow problem?
  #3
sarmech
Guest
 
Posts: n/a
Hi, Thanks for your help
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
the classical problem of the flow around a Cylinder Re=35? behrang2009 FLUENT 4 October 16, 2009 19:35
Flow not moving - Supersonic/Initial Pressure problem? shankara.2 FLUENT 0 June 9, 2009 20:49
Flow past cylinder (Re=10^5) lbeaudet Main CFD Forum 9 June 2, 2009 03:59
Complex problem: Open Channel Flow lett FLUENT 17 April 9, 2009 10:56
Turbulent steady flow around a circular cylinder Mirek Kabacinski FLUENT 0 July 23, 2003 18:40


All times are GMT -4. The time now is 15:59.