CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

flow around building

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 9, 2003, 12:38
Default flow around building
  #1
fb
Guest
 
Posts: n/a
Hello everybody,

I am new to CFD and have to calculate the wind-flow around a building with LES. As a starting point I have a code that calculates the flow around a cubus.

To adjust the code, what do I have to change? Right know, I think, I have to scale the grid and change the boundary-inlet-condition.

For example the grid is length=9 heigt=2 width=7 and the cubus is placed in the middle with 1x1x1. Now I want to have a cubus/building which is e.g. 10x10x10. What do I have to consider when scaling this grid? Is there any literature about grid-generating for that kind of problem?

For the boundary-inlet-condition I would set a power law function for velocity. U/U0=(Z/Z0)**1.4. Are there any other ideas? Does anybody know, where I can find further information about the exponent and those bc for Germany/Hannover?

Thanks! Greetings

fb
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Compressible flow, no data at the outlet mireis FLUENT 6 September 3, 2015 02:10
simulating flow wind in building teguhtf FLUENT 0 April 21, 2011 02:01
Mass flow and U-Mom flow in CFX Zhihua Xie CFX 0 September 3, 2007 09:49
problem simulating flow around a building xavier FLUENT 5 January 3, 2007 06:16
transform navier-stokes eq. to euler-eq. pxyz Main CFD Forum 37 July 7, 2006 08:42


All times are GMT -4. The time now is 22:56.