CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

boundary condition for flat plate

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 18, 2010, 17:49
Default boundary condition for flat plate
  #1
Member
 
Ardalan
Join Date: Feb 2010
Location: Baku
Posts: 38
Rep Power: 7
Ardalan is on a distinguished road
I,m having problem with imposing proper boundary conditions for simple-based finite volume code for incompressible flow
by setting the inlet velocity u=1 and implementing the boundary condition suggested by versteeg( in his book:uj=m_in/m_out*u_j-1) I couldn't get a converged solution. by implementing this boundary condition I get a very large negative sources in the end plate cell column for the pressure correction equation. and these sources results in a large p_prime gradients near the end of the wall.
I have to mention that neuman boundary condition have been used for all 4 side of the domain.
any suggestions for a better and proper boundary conditions??????
Ardalan is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
inlet velocity boundary condition murali CFX 5 August 3, 2012 08:56
problem with boundary condition??? smn CFX 5 November 24, 2009 07:37
outlet boundary condition Nina Schiepel CFX 2 July 12, 2008 15:27
spanwiperiodic boundary condition for LES Sungho Yoon CFX 5 July 8, 2008 06:21
Pressure Boundary Condition Matt Umbel Main CFD Forum 0 January 11, 2002 11:06


All times are GMT -4. The time now is 04:30.