CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Multidomain LES/RANS

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 27, 2005, 17:44
Default Multidomain LES/RANS
  #1
turb
Guest
 
Posts: n/a
Hi all, I wanted to couple two domains, one with a RANS solution and one with a LES solution. Sagaut's book tells me exactly what to do with velocity and even viscosity.

My question is: what to do with pressure? Should a set grad (Ples) = grad (Prans) at boundaries? (I am mostly worried about "inlet" boundaries).

Thanks all.
  Reply With Quote

Old   January 27, 2005, 21:00
Default Re: Multidomain LES/RANS
  #2
john
Guest
 
Posts: n/a
look at here:

http://www.stanford.edu/~schluter/publications.htm
  Reply With Quote

Old   February 1, 2005, 20:43
Default Re: Multidomain LES/RANS
  #3
turb
Guest
 
Posts: n/a
Hi John, Still, none of them specify how to treat pressure in the frontier... Any idea? Thanks.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adequate timestep selection for multidomain problem gerardosrez CFX 6 November 28, 2010 18:50
Hybrid LES/RANS init-instantaneous-vel audunsy FLUENT 0 January 24, 2010 13:26
[ICEM] Geometry cleaning to use a multidomain simulation Attesz ANSYS Meshing & Geometry 1 October 20, 2009 09:38
zonal LES/RANS not DES Torn FLUENT 0 December 2, 2008 01:16
Multidomain method with non-overlapping, non-matching grids with staggered arrangement franck bertagnolio Main CFD Forum 1 April 25, 2000 15:40


All times are GMT -4. The time now is 14:02.