CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Simple COMSOL Question

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 9, 2011, 12:06
Default Simple COMSOL Question
  #1
Member
 
Eric M. Tridas
Join Date: May 2011
Location: Tampa, Florida
Posts: 48
Rep Power: 6
eric.m.tridas is on a distinguished road
I am new to CFD and just exploring what COMSOL can do. I am trying to simulate a pressure driven flow through a tube in 2D. This is a simple problem to solve analytically but I cannot obtain any numeric results. The only way to obtain a solution is to apply some sort of inlet velocity (using laminar inflow). I feel I may have some issues with whether or not I should be using a reference pressure, what the initial value for pressure I should use, and which type of boundary condition to apply. The example I am trying to simulate is a 10 cm diameter tube, 1 m long, water as the fluid, a pressure of 100 kPa on the inlet and 80 kPa on the outlet. I feel I am just doing something quite basic incorrectly which is preventing me from obtaining an solution. Thanks for your help.
eric.m.tridas is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Simple Question Regarding Symmetry Planes Atella CFX 3 April 11, 2010 06:44
Simple Question Regarding Symmetry Planes Atella Main CFD Forum 0 April 9, 2010 10:58
Question of Anil Date's SIMPLE method universez Main CFD Forum 0 November 18, 2009 21:12
Comsol question rocket Main CFD Forum 3 July 31, 2009 04:45
Simple Question Regarding Continuity Closure RC FLUENT 2 March 25, 2004 06:30


All times are GMT -4. The time now is 18:21.