How to start with Grid Generation/Meshing

VSass · April 24, 2013, 05:40

Hello,

i'm not sure if this is the proper forum for my question,but i want to ask for some basics/fundamentals in grid generation. To be more precise, i want to read about constructing meshes, alone or from cad geometries. Are there any books for beginners? Also, from the known softwares (Ansys,Gambit etc), which is more friendly for amateurs?

Thanks in advance

sameben · April 24, 2013, 05:45

Hi ,
Are you from the academia or the industry?

VSass · April 24, 2013, 05:49

Thanks for the quick reply!

I'm an undergraduate student working on a thesis on CFD, and i want to extend my knowledge to grid generation as deeply as possible, in order to be able to construct and examine any geometry i want.

sameben · April 24, 2013, 07:09

Can I have your email?

sameben · April 24, 2013, 07:22

You should be able to find a lot of papers authored by Dr. Peter Eiseman here

http://www.gridpro.com/publications/names/40/pages/2

jchawner · July 21, 2013, 16:46

Thompson's book is a classic (and freely available online).

http://www.erc.msstate.edu/publications/gridbook/

April 24, 2013, 05:40	How to start with Grid Generation/Meshing	#1
VSass Member VS Join Date: Nov 2012 Posts: 86 Rep Power: 13	Hello, i'm not sure if this is the proper forum for my question,but i want to ask for some basics/fundamentals in grid generation. To be more precise, i want to read about constructing meshes, alone or from cad geometries. Are there any books for beginners? Also, from the known softwares (Ansys,Gambit etc), which is more friendly for amateurs? Thanks in advance

April 24, 2013, 07:22		#5
sameben Member Sam Join Date: Mar 2009 Posts: 35 Rep Power: 17	You should be able to find a lot of papers authored by Dr. Peter Eiseman here http://www.gridpro.com/publications/names/40/pages/2 elvis likes this.

July 21, 2013, 16:46		#6
jchawner Senior Member John Chawner Join Date: Mar 2009 Location: Fort Worth, Texas, USA Posts: 275 Rep Power: 18	Thompson's book is a classic (and freely available online). http://www.erc.msstate.edu/publications/gridbook/ __________________ John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"grid points" or "grid interface"	ztdep	Main CFD Forum	1	June 6, 2007 15:00
Nonlinear Multigrid: Coarse Grid Operators	Greg Lewin	Main CFD Forum	0	December 1, 2006 09:39
2d CGNS grid for use with ensight	zonexo	Main CFD Forum	0	May 16, 2006 21:37
Non-uniform grid calculation	Aspens	Main CFD Forum	1	February 23, 2000 14:15
Lets start the public domain CFD-Project!	Heinz Wilkening	Main CFD Forum	3	March 11, 1999 22:55

April 24, 2013, 05:45		#2
sameben Member Sam Join Date: Mar 2009 Posts: 35 Rep Power: 17	Hi , Are you from the academia or the industry?

April 24, 2013, 05:49		#3
VSass Member VS Join Date: Nov 2012 Posts: 86 Rep Power: 13	Thanks for the quick reply! I'm an undergraduate student working on a thesis on CFD, and i want to extend my knowledge to grid generation as deeply as possible, in order to be able to construct and examine any geometry i want.

April 24, 2013, 07:09		#4
sameben Member Sam Join Date: Mar 2009 Posts: 35 Rep Power: 17	Can I have your email?