CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

Difine patch

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 2, 2013, 08:30
Arrow Difine patch
  #1
New Member
 
saman sameti
Join Date: Oct 2013
Posts: 1
Rep Power: 0
saman1366 is on a distinguished road
Hi Dear all
I create a blade and I want to mesh it. But I use the wind turbine wizard.
So I must define patch (I think input and output) for the domain that created by wind turbine wizars.
PLease help me for way to defien this in IGG or outoGrid5.
Thanks for your help.
saman1366 is offline   Reply With Quote

Old   November 3, 2013, 15:03
Default
  #2
Senior Member
 
Hamid Zoka
Join Date: Nov 2009
Posts: 164
Rep Power: 8
Hamidzoka is on a distinguished road
If you are meshing your blade in Autogrid5 you don't need to define any patch, cause it is done automatically. But in case you are to make your own domain in IGG you should define each boundary.
Hamidzoka is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
y+ and u+ values with low-Re RANS turbulence models: utility + testcase florian_krause OpenFOAM 108 June 9, 2015 08:13
[GAMBIT] periodic faces not matching Aadhavan ANSYS Meshing & Geometry 6 August 31, 2013 11:25
CheckMeshbs errors ivanyao OpenFOAM Running, Solving & CFD 2 March 11, 2009 03:34
Import gmsh msh to Foam adorean Open Source Meshers: Gmsh, Netgen, CGNS, ... 24 April 27, 2005 08:19
Multicomponent fluid Andrea CFX 2 October 11, 2004 05:12


All times are GMT -4. The time now is 20:35.