CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

corner sepration

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 30, 2008, 18:11
Default corner sepration
  #1
Magic
Guest
 
Posts: n/a
I performed the RANS simulation (K-L model)for a stator compressor blade with the height of 10 cm and the inlet Mach number of 0.6. Unfortunatley the corner separation is larger than (50%)what we measured in the experiment. Is any body have any idea? how the mesh should be? (any suggestion is kindly welcome.)
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Courant no%23 and sharp corner in 3D jam OpenFOAM Running, Solving & CFD 6 November 18, 2008 09:21
Corner nodes and neumann bc Neazen Main CFD Forum 2 March 31, 2008 07:21
Node in the corner reader Main CFD Forum 1 March 21, 2003 06:51
Corner Point Geometry Tareq Al-shaalan Main CFD Forum 0 July 23, 2002 10:30
mesh generation near corner G. Sun Main CFD Forum 0 August 19, 2000 20:11


All times are GMT -4. The time now is 09:48.