CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

a problem in NUMECA application

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 15, 2010, 15:39
Question a problem in NUMECA application
  #1
New Member
 
Join Date: Aug 2010
Posts: 4
Rep Power: 7
alireza_turbo is on a distinguished road
We are going to initialize 2 rows of blades from an axial turbine in AutoGrid. Unfortunately, we can not define the geometry for the second row in AutoGrid. We think that we should use special setting in Autoblde exporting but we donít know how it is possible.
alireza_turbo is offline   Reply With Quote

Old   June 10, 2011, 02:57
Default
  #2
Member
 
CJ
Join Date: Apr 2010
Location: Malaysia
Posts: 69
Rep Power: 7
oldshoes81 is on a distinguished road
Send a message via MSN to oldshoes81 Send a message via Skype™ to oldshoes81
Hi,

If you are dealing with 2 rows of blades, you should use Autoblade(TM) to design one row by one row. Say, your machine consists of row 1 and row 2. You may use AutoBlade(TM) to design the row 1 first, and export to 'row 1.geomturbo' and subsequently to row 2 with 'row 2.geomturbo'.

Within the GUI of AutoGrid 5, you have to import the geometry one by one.
__________________
Regards
CJ
NUMIT Enterprise, Malaysia
+6 017 656 3436
http://maccom-numit.blogspot.com
http://www.numit.com.my
Email : seiko.q@numit.com.my
oldshoes81 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Incoherent problem table in hollow-fiber spinning Gianni FLUENT 0 April 5, 2008 10:33
natural convection problem for a CHT problem Se-Hee CFX 2 June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 19:13
ICEM meshing problem Forrest CFX 4 May 25, 2005 18:37
GAMBIT meshing problem Gauthier Lambert Main CFD Forum 1 August 3, 2000 09:22


All times are GMT -4. The time now is 03:11.