CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

AutoBlade/CFD Screening

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 23, 2011, 12:58
Unhappy AutoBlade/CFD Screening
  #1
New Member
 
shahed Malekipour
Join Date: Dec 2011
Posts: 5
Rep Power: 5
shahed.malekipour is on a distinguished road
Hello all,
I am interested in numerical optimization using
NUMECA, Fine/Design3D. I have previously worked with the Fine solver
for numerical simulation of Rotor37 and other profiles. But in
AutoBlade/CFD Screening when I import the parameterized Rotor37 and
perform the settings of computation task and press the start button,
it gives me no error but the process no longer continues! The massage
is
"start_status_ok
Reconnected_to_other_Fine_Sesion"
It would be kind of you if you help me what the defect is.
Regards
shahed.malekipour is offline   Reply With Quote

Old   May 29, 2012, 03:17
Default
  #2
Senior Member
 
Hamid Zoka
Join Date: Nov 2009
Posts: 162
Rep Power: 8
Hamidzoka is on a distinguished road
Dear Shahed;
this is perhaps due to your .dll files.
check if your installation folder has got all required .dll files.

regards
Hamidzoka is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 12:32.