CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

Bulky edges using snappyhexmesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 11, 2013, 10:38
Default Bulky edges using snappyhexmesh
  #1
Pin
New Member
 
Ingri Løvaas
Join Date: Jan 2013
Posts: 1
Rep Power: 0
Pin is on a distinguished road
Hi,
I'm having troubles getting the edges properly meshed using snappyHexMesh. The geometry is modelled using blender, where SnappyHexMeshDict and .stl files are generated through swiftsnap-addon in blender. As seen from the attached images the edges wont snap properly and the surface is bulky near the edges. I
have tried alternative settings for the snapcontrol entries and disabled some of the MeshQualityControl as the minTetQuality (set to 0.5), but then the checkMesh fails. I would be really happy if anyone could help or leave some comments on what might be wrong. I have attached files for running snappyHexMesh.

Thanks,
Pin
Attached Files
File Type: zip bulky_edge.jpg.zip (85.8 KB, 5 views)
File Type: zip shm_project_filter.zip (38.0 KB, 3 views)
Pin is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SnappyHexMesh refuses to refine certain edges TomP OpenFOAM Native Meshers: snappyHexMesh and Others 13 November 14, 2014 22:39
No layers in a small gap bobburnquist OpenFOAM Native Meshers: snappyHexMesh and Others 2 November 25, 2012 09:54
Specify snappyHexMesh edges to snap mturcios777 OpenFOAM 0 August 18, 2011 14:49
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
snappyHexMesh aborting Tobi OpenFOAM Native Meshers: snappyHexMesh and Others 0 November 10, 2010 04:23


All times are GMT -4. The time now is 23:35.