CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

Separating areas which don't have layers for visualizing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 15, 2013, 09:29
Default Separating areas which don't have layers for visualizing
  #1
Member
 
Join Date: Mar 2009
Posts: 68
Rep Power: 7
aerogt3 is on a distinguished road
Hey all,


I am using snappyHexMesh, and am wondering how I can see which areas of my mesh are not getting layers? At the end of the process snappyHexMesh tells you something like this:

Code:
Extruding 670264 out of 690052 faces (97.1%). Removed extrusion at 1 faces.
Added 1894349 out of 2070156 cells (91.5%).
I would basically like to see ONLY these 91.5% of faces where layers were successfully added, or alternatively the 8.5% where layers were not grown. Is there any way to do this?
aerogt3 is offline   Reply With Quote

Reply

Tags
areas, faces, layers, visualization

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2D snappyHexMesh with layers grjmell OpenFOAM Native Meshers: snappyHexMesh and Others 2 May 27, 2013 12:00
Adding layers goes wrong with SnappyHexMesh Elise OpenFOAM Native Meshers: snappyHexMesh and Others 1 April 22, 2013 02:32
Effect of adding layers with sHM Nucleophobe OpenFOAM Native Meshers: snappyHexMesh and Others 4 August 20, 2012 16:45
Layers don't fully surround surface EVBUCF OpenFOAM Native Meshers: snappyHexMesh and Others 14 August 20, 2012 04:31
Layers and turbolence in Interfoam danvica OpenFOAM Running, Solving & CFD 0 April 30, 2012 03:11


All times are GMT -4. The time now is 15:41.