|October 3, 2011, 11:46||
Strange cells created by SnappyHexMesh
Join Date: Jul 2011
Posts: 6Rep Power: 7
When I had a closer look at my mesh in paraView i found some strange looking cells, first it looked like SHM had created an isolated piece of geometry outside the cell as seen in picture 1.
When it was remeshed with the surface refinement lowered one step there was trouble with cells cutting through the stl surface instead, like in picture 2 and 3.
Does it mean that there are quality issues with the stl file?
The stl is directly exported from CATIA and visulally it looks fine in paraView, could there be problems with for example the surface normals or is there a problem in snappyHexMesh or paraview?
Thankful for all comments!
|December 22, 2012, 09:08||
Join Date: Dec 2012
Posts: 1Rep Power: 0
I am a new user of openfoam and I have the same problem with snappy mesh. Do you solve your problem? if so, please help me.
|December 21, 2014, 20:06||
Join Date: Oct 2012
Posts: 30Rep Power: 5
I know it has been a while since you posted this thread. However, have you finally found the source of the warning and hopefully solved the problem? I am having a similar warning problem now during my snap process. Thank you.
|cell, meshing, snappyhexmesh|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Import netgen mesh to OpenFOAM||hsieh||Open Source Meshers: Gmsh, Netgen, CGNS, ...||32||September 13, 2011 05:50|
|snappyHexMesh won't work - zeros everywhere!||sc298||OpenFOAM Native Meshers: snappyHexMesh and Others||2||March 27, 2011 21:11|
|snappyHexMesh aborting||Tobi||OpenFOAM Native Meshers: snappyHexMesh and Others||0||November 10, 2010 04:23|
|physical boundary error!!||kris||CD-adapco||2||August 3, 2005 00:32|
|CFX4.3 -build analysis form||Chie Min||CFX||5||July 12, 2001 23:19|