CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Mesh Utilities

Inside and outside mesh with snappyhexmesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 31, 2008, 23:50
Default Hey: I am practicubg a simp
Ning Yang
Join Date: Mar 2009
Location: University Park, PA, USA
Posts: 85
Rep Power: 9
nzy102 is on a distinguished road

I am practicubg a simple case using snappyhexmesh. Basically I am trying to mesh a 2D circle from both inside and outside. The outside mesh looks perfect without any problem. The inside mesh, looks pretty ugly on the boundary. It looks like that there is some problem with snapping without inside mapping. All the parameters are the same for both cases except the locationinmesh. I am just wondering if there is something different in terms of parameter setup for the inside meshing? Thank you.

nzy102 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Inside and outside mesh with snappyhexmesh nzy102 OpenFOAM Native Meshers: snappyHexMesh and Others 21 February 16, 2016 17:42
SnappyHexMesh Point is not inside Mesh but it is wolle1982 OpenFOAM Mesh Utilities 6 September 3, 2010 08:59
SnappyHexMesh meshes inside and outside of an STL geometry villier OpenFOAM Mesh Utilities 17 June 15, 2010 19:51
Inside and outside mesh with snappyhexmesh nzy102 OpenFOAM Mesh Utilities 0 August 31, 2008 23:44
SnappyHexMesh not generate mesh first time mavimo OpenFOAM Mesh Utilities 4 August 26, 2008 07:08

All times are GMT -4. The time now is 14:09.