|February 13, 2013, 18:14||
Mesh importation from Salome-Meca problem
Join Date: Feb 2013
Posts: 4Rep Power: 5
I'm currently doing a final-year project for my dissertation, and have spent a considerable amount of time trying to independently learn openFOAM, Salome, and even 'linux' for that matter.
After completing my mesh generation, I tried to use the ideasUnvToFoam function, and could not solve the following error:
Starting reading points at line 3.
Read 100964 points.
Starting reading cells at line 201934.
First occurrence of element type 11 for cell 1 at line 201935
First occurrence of element type 41 for cell 1531 at line 206525
First occurrence of element type 111 for cell 134541 at line 472545
Read 299092 cells and 133010 boundary faces.
Starting reading patches at line 1070731.
For group 1 named Walls trying to read 132152 patch face indices.
For group 2 named MPIn trying to read 385 patch face indices.
For group 3 named MPOut trying to read 385 patch face indices.
For group 4 named ECOIn trying to read 88 patch face indices.
ideasUnvToFoam: ideasUnvToFoam.C:881: int main(int, char**): Assertion `nrFaceCells[faceI] == 1 || nrFaceCells[faceI] == 2' failed.
Any help would be immensely appreciated, thank you very much for reading.
|mesh conversion, openfoam, salomemeca, unv|
|Thread||Thread Starter||Forum||Replies||Last Post|
|engineFoam new mesh problem||ayhan515||OpenFOAM Meshing & Mesh Conversion||5||August 10, 2015 08:45|
|[ICEM] Problem making structural mesh on a surface||froztbear||ANSYS Meshing & Geometry||1||November 10, 2011 09:52|
|Dynamic Mesh Problem.||Tom Clark||FLUENT||9||July 7, 2010 07:56|
|salome, openfoam and moving mesh||prhlava||OpenFOAM Running, Solving & CFD||8||November 9, 2009 09:59|
|unstructured vs. structured grids||Frank Muldoon||Main CFD Forum||1||January 5, 1999 11:09|