|
[Sponsors] |
April 16, 2013, 11:18 |
|
#28 |
New Member
David Haces
Join Date: Mar 2013
Posts: 28
Rep Power: 13 |
Hi,
It seems that I solved it. The problem was that the mesh was written in mm, so it was 1 km length. I was going to scale it after doing snappyHexMesh but It's better to do it before. It seems that the little displacements of the mesh was 1000 times bigger, and snappy tried to reduce this displacements. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Error running openfoam in parallel | fede32 | OpenFOAM Programming & Development | 5 | October 4, 2018 16:38 |
P1 and DT Radiation Model Failure | Birnensuppe | CFX | 6 | November 13, 2017 06:06 |
The fluent stopped and errors with "Warning: License server connection lost.poll: pro | yuyuxuan | FLUENT | 4 | January 9, 2014 05:20 |
snapEdge not working | crossley90 | OpenFOAM | 4 | August 4, 2011 04:26 |
[snappyHexMesh] snapEdge compilation problems | rassilon | OpenFOAM Meshing & Mesh Conversion | 4 | February 23, 2011 21:23 |