CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Meshing & Mesh Conversion

cgnsToFoam problems with "QUAD_4" cells

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 8, 2011, 09:29
Default cgnsToFoam problems with "QUAD_4" cells
  #1
Member
 
don lenardo
Join Date: Nov 2010
Posts: 64
Rep Power: 5
lentschi is on a distinguished road
Hello everyone,

I performed cgnsToFoam but got some warnings:

/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM Extend Project: Open source CFD |
| \\ / O peration | Version: 1.6-ext |
| \\ / A nd | Web: www.extend-project.de |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Create time

--> FOAM Warning : Cell type "QUAD_4" found in zone 0, section 20 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 0, section 21 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 0, section 22 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 1, section 117 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 1, section 118 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 1, section 119 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 1, section 120 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 2, section 1 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 2, section 2 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 2, section 3 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 3, section 281 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 3, section 282 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 3, section 283 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 3, section 284 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 3, section 285 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 3, section 286 has no OpenFOAM equivalence - skipping
--> FOAM Warning : Cell type "QUAD_4" found in zone 3, section 287 has no OpenFOAM equivalence - skipping
--> FOAM Warning : The BC "DT to RU Side 1" is defined with a type BCTypeNull.
It will be mapped to Foam's wallFunction type
--> FOAM Warning : The BC "DT to RU Side 2" is defined with a type BCTypeNull.
It will be mapped to Foam's wallFunction type
--> FOAM Warning : The BC "RU to SVWG Side 1" is defined with a type BCTypeNull.
It will be mapped to Foam's wallFunction type
--> FOAM Warning : The BC "SVWG to SC Side 2" is defined with a type BCTypeNull.
It will be mapped to Foam's wallFunction type
--> FOAM Warning : The BC "NOSE_LOWER Side 1" is defined with a type BCTypeNull.
It will be mapped to Foam's wallFunction type
--> FOAM Warning : The BC "NOSE_LOWER Side 2" is defined with a type BCTypeNull.
It will be mapped to Foam's wallFunction type
--> FOAM Warning : The BC "NOSE_UPPER Side 1" is defined with a type BCTypeNull.
It will be mapped to Foam's wallFunction type
--> FOAM Warning : The BC "NOSE_UPPER Side 2" is defined with a type BCTypeNull.
It will be mapped to Foam's wallFunction type
--> FOAM Warning : The BC "RU to SVWG Side 2" is defined with a type BCTypeNull.
It will be mapped to Foam's wallFunction type
--> FOAM Warning : The BC "SVWG to SC Side 1" is defined with a type BCTypeNull.
It will be mapped to Foam's wallFunction type
Output of mesh and boundary conditions


Now,I want to show this "QUAD_4" cells in ParaView to localize them.
Does anyone know, how I can do that?Additionally I don't know, how I can allocate the information "zone 0, section 20" to specific points?


Thanks in advance.

Markus
lentschi is offline   Reply With Quote

Old   March 9, 2011, 04:49
Default
  #2
Member
 
don lenardo
Join Date: Nov 2010
Posts: 64
Rep Power: 5
lentschi is on a distinguished road
I got it!

The adfviewer visualises these '"QUAD_4"-Cells.
lentschi is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Improving Mesh - deleting cells sErik OpenFOAM 6 August 3, 2010 09:28
SnappyHexMesh for internal Flow vishwa OpenFOAM 21 February 27, 2010 03:47
external flow with snappyHexMesh chelvistero OpenFOAM 11 January 15, 2010 19:43
Convergence Problems Carlos FLUENT 0 March 12, 2007 03:44
udf begin_c_loop problems Abigail FLUENT 0 September 27, 2006 09:41


All times are GMT -4. The time now is 09:37.