CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Paraview & paraFoam

Paraview shuts down when post processing of icoFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 31, 2008, 06:54
Default Hi, everyone, for some reas
  #1
New Member
 
jin xu
Join Date: Mar 2009
Location: london, UK
Posts: 13
Rep Power: 7
jin_xu is on a distinguished road
Hi, everyone,

for some reasons, I reinstall OF 1.3 in my laptop, and after that, i want to make sure nothing is wrong in my installation by running the cavity(icoFoam) case, but when postprocessing the results, paraview shuts down aotumatically and the error reads:

snail@snail-laptop:~/OpenFOAM/snail-1.3/run/tutorials$ paraFoam icoFoam cavity
/*---------------------------------------------------------------------------*\
| ========= | |
| \ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \ / O peration | Version: 1.3 |
| \ / A nd | Web: http://www.openfoam.org |
| \/ M anipulation | |
\*---------------------------------------------------------------------------*/

Segmentation fault (core dumped)

Could anyone give me some ideas?

Thanks in advance

jin
jin_xu is offline   Reply With Quote

Old   June 1, 2008, 19:01
Default The correct command is "paraFo
  #2
Senior Member
 
Srinath Madhavan (a.k.a pUl|)
Join Date: Mar 2009
Location: Edmonton, AB, Canada
Posts: 697
Rep Power: 10
msrinath80 is on a distinguished road
The correct command is "paraFoam . cavity" assuming that you are already at the icoFoam root directory. Please please follow the user guide[1] exactly for once. If you wish to use the full path the syntax is:

paraFoam $FOAM_RUN/tutorials/icoFoam cavity


[1] http://www.opencfd.co.uk/openfoam/do...#x5-120002.1.2
msrinath80 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX Post processing aditya CFX 1 July 6, 2008 12:09
[Paraview] Batch processing and screenshots saves. el douco ParaView 0 April 9, 2008 03:37
Flow3d post processing with ParaView Rajiv Kothari ParaView 0 May 24, 2007 09:00
UDF for post processing mvee FLUENT 0 May 23, 2007 12:13
UDS UDF for post-processing KRK FLUENT 1 January 19, 2007 04:31


All times are GMT -4. The time now is 09:55.