 |
 |
 |
|
|
|
[Sponsors] | ||||
February 15, 2007, 19:06
|
Line Plot
|
#1 |
|
Member
Shaun Cooper
Join Date: Mar 2009
Posts: 54
Rep Power: 17  |
Hi all,
I have been trying to plot a field along a line in my model. To do this I have used the Pick filter so that the Probe filter is then available to use. I then select line in the probe filter and specify the line. I thought that would work, however the plot that is returned is only a strainght line with a value of zero. I know that this is incorrect but I don't know how to get this plot to work. Thanks, Shaun |
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Gmsh] No cells read from file ".msh" | hwsv07 | OpenFOAM Meshing & Mesh Conversion | 5 | August 13, 2018 15:42 |
| 8x icoFoam speed up with Cufflink CUDA solver library | kmooney | OpenFOAM Running, Solving & CFD | 42 | November 6, 2012 11:37 |
| [blockMesh] error message with modeling a cube with a hold at the center | hsingtzu | OpenFOAM Meshing & Mesh Conversion | 2 | March 14, 2012 09:56 |
| Installation OF1.5-dev | ttdtud | OpenFOAM Installation | 46 | May 5, 2009 02:32 |
| [blockMesh] BlockMeshmergePatchPairs polyTopoChanger | benru | OpenFOAM Meshing & Mesh Conversion | 3 | June 29, 2008 21:24 |
Threaded Mode
