|
[Sponsors] |
plateHole and mapFields - tutorial exercise with FOAM IO FATAL ERROR |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 6, 2013, 07:48 |
plateHole and mapFields - tutorial exercise with FOAM IO FATAL ERROR
|
#1 |
New Member
G. Wind
Join Date: Oct 2013
Location: Rio de Janeiro
Posts: 7
Rep Power: 12 |
Hi folks,
in execise 2.2.4.1 of the tutorial, I manage to refine the mesh for plateHole. However, when I try to map the final coarse mesh results from section 2.2.3 to the initial conditions for the fine mesh, I get the following answer. --> FOAM FATAL IO ERROR: size 1000 is not equal to the given value of 4000 file: /home/yoda/OpenFOAM/yoda-2.2.1/run/tutorials/stressAnalysis/solidDisplacementFoam/plateHolefino/100/sigmaxz from line 18 to line 1145. From function Field<Type>::Field(const word& keyword, const dictionary&, const label) in file /home/opencfd/OpenFOAM/OpenFOAM-2.2.1/src/OpenFOAM/lnInclude/Field.C at line 236. FOAM exiting I understand that sizes should not be the same, because of mesh refining. So, why is it giving this error? Thanks in advance. |
|
November 20, 2013, 09:23 |
|
#2 |
Member
Vincent Leroy
Join Date: Jul 2012
Location: Rhode-Saint-Genèse, Belgium
Posts: 43
Rep Power: 13 |
Dear Gwind,
I had this exact same error. While I'm not certain of what caused it to happen, I noticed that things went okay when I deleted every run directories (0/, 20/, ..., 100/) in the directory of the refined mesh case (plateHoleFineMesh/ in my case). I hope this helps you. V |
|
November 26, 2013, 06:19 |
|
#3 |
New Member
G. Wind
Join Date: Oct 2013
Location: Rio de Janeiro
Posts: 7
Rep Power: 12 |
Thanks a lot!
Gwind |
|
|
|