|
[Sponsors] |
[swak4Foam] Getting a set of cells information by swak4Foam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 8, 2016, 05:31 |
Getting a set of cells information by swak4Foam
|
#1 |
Member
Arsalan
Join Date: Jul 2014
Posts: 74
Rep Power: 11 |
Dear Foamer,
I'm simulating single bubble rising in a 3D domain by interFoam, I want to store cell coordinates of alpha=0.5 (actually interface cells) at the middle plane of z axis during the simulation by swakExpressions and after that using funkyDoCalc. The problem is how I can define a plane by swak4Foam and get coordinates of all of the cells with alpha=0.5, while the available accumulations are min, max, average ... but not all! Any help will be appreciated. Best regards, Arsalan. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Snappy creates strange cells far away from boundary | vainilreb | OpenFOAM Meshing & Mesh Conversion | 3 | December 16, 2020 05:11 |
How to use a UDF to set the volume fraction in the cells next to a wall? | DF15 | Fluent UDF and Scheme Programming | 33 | August 20, 2020 13:36 |
killed "snappyHexMesh" | parkh32 | OpenFOAM Pre-Processing | 2 | April 8, 2012 17:12 |
[snappyHexMesh] snappyHexMesh aborting | Tobi | OpenFOAM Meshing & Mesh Conversion | 0 | November 10, 2010 03:23 |
Help with GNUPlot | Renato. | Main CFD Forum | 6 | June 6, 2007 19:51 |