CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Post-Processing

sample does not create folder for all times

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 3, 2011, 04:07
Default sample does not create folder for all times
  #1
New Member
 
Joel Lehikoinen
Join Date: Jun 2011
Posts: 26
Rep Power: 6
joel.lehikoinen is on a distinguished road
Hi,

I'm learning how to use OpenFOAM, and I've started from the tutorials. I encountered a problem in the "Stress analysis of a plate" tutorial ( http://openfoam.com/docs/user/plateHole.php#x6-370002.2 ). The basic case worked correctly, but when I tried to do the exercises (graded mesh, enlarged plate) sample would create folder only for the initial time.

I changed the tutorial case by introducing a graded mesh for a larger plate (without changing the size of the hole). I mapped the final results of the tutorial case as the initial conditions for my case. To this end, I also changed the simulation time to run from 100 to 200 (with writeouts every 20 steps). If I run sample in the new case directory, it only creates a folder for time 100, even though the printout from sample does show the other times. The printout looks identical to what I get from running sample in the tutorial case directory.

Has anyone else encountered this problem? I understood that I do not need to make any changes to the sampleDict file.
joel.lehikoinen is offline   Reply With Quote

Reply

Tags
sample

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sample issues MikePo OpenFOAM Post-Processing 1 February 7, 2010 20:20
Actuator disk model audrich FLUENT 0 September 21, 2009 07:06
Where's the singularity/mesh flaw? audrich FLUENT 3 August 4, 2009 01:07
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Meshing a Sphere Ajay FLUENT 9 March 29, 2004 09:14


All times are GMT -4. The time now is 05:57.