CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

how to do BC of p_in depending on p_out and u_in

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 28, 2013, 11:27
Default how to do BC of p_in depending on p_out and u_in
  #1
New Member
 
Hsingtzu Wu
Join Date: Feb 2011
Posts: 21
Rep Power: 6
hsingtzu is on a distinguished road
Hi

I am wondering how to set the boundary conditions for this situation:
I am simulating the velocity and pressure of water going thru a cylinder.
I give the pressure at the outlet and the velocity at the inlet. zeroGradient of velocity at the outlet and the pressure at the inlet depends on the pressure at the outlet and the velocity at the inlet. I know how to set BC for the previous three, but I have no clue how to set the fourth one.

I have searched thru the web and the manual, but I have not found a satisfying answer. I am wondering if anyone here can nod a direction for me.
Thanks!

Hsingtzu
hsingtzu is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 06:54.