|
[Sponsors] |
SimpleFoam results as initial condition to rhoSimpleFoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 21, 2013, 18:07 |
SimpleFoam results as initial condition to rhoSimpleFoam
|
#1 |
New Member
Marcelo
Join Date: May 2013
Posts: 10
Rep Power: 12 |
Hi All,
Is it possible to use a incompressible results as a initial condition to a compressible case? (I know that there is difference in the pressure dimension and there are different fields for each case). I am currently using rhoSimpleFoam to solve the problem, but I am having a lot of convergence problems. So, I would like to know if it is possible to run the problem with simpleFoam and use the fields as initial condition to rhoSimpleFoam. Thank you for the help. Regards, Marcelo |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
problem with Min/max rho | tH3f0rC3 | OpenFOAM | 8 | July 31, 2019 09:48 |
High Courant Number @ icoFoam | Artex85 | OpenFOAM Running, Solving & CFD | 11 | February 16, 2017 13:40 |
Micro Scale Pore, icoFoam | gooya_kabir | OpenFOAM Running, Solving & CFD | 2 | November 2, 2013 13:58 |
pisoFoam - unstable pressure residual | Industrial_CFD | OpenFOAM Running, Solving & CFD | 21 | February 24, 2013 15:39 |
Low Mach number Compressible jet flow using LES | ankgupta8um | OpenFOAM Running, Solving & CFD | 7 | January 15, 2011 13:38 |