|
[Sponsors] |
velocityFilmShell with rotating wall velocity |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 26, 2023, 00:29 |
velocityFilmShell with rotating wall velocity
|
#1 |
New Member
Zanh
Join Date: Jun 2017
Posts: 8
Rep Power: 8 |
Hello everyone,
Thank you very much for reading my post. In my simulation, velocityFilmShell boundary is applied at a wall for the evaluation of film thickness. However, that wall should be rotated because of the requirement of my problem. I have tried use velocityFilmShell for U at the wall and use MRF for rotation. However it seems does not work. I am also thinking about dynamic mesh, but it could be time consuming if dynamic mesh is applied. Could you please me some advices. Thank you very much. Regards, Zang |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
decomposePar problem: Cell 0contains face labels out of range | vaina74 | OpenFOAM Pre-Processing | 37 | July 20, 2020 05:38 |
Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 06:20 |
Rotating wall velocity boundary condition for axisymmetric flow problem | diwakaranant | SU2 | 1 | March 23, 2013 23:45 |
CFX does not continue | Shafiul | CFX | 10 | February 17, 2011 07:57 |
question about governing equation in CFX using rotating/non rotating reference frame | rystokes | CFX | 0 | January 12, 2010 06:14 |