Warnings and problems with bc

evgenii · February 7, 2006, 07:16

Hi everyone.
I have some problems with b.c. again.
I wrote my own solver and it worked succesfully. But somehow now it returns errors:
-Incorrect patch field type "directionMixed" for patch ... Boundary condition specifies 'empty' for field H.
This error appears thrice for each of 3 patches.

What's the problem with it?

And the second error is:
-Invalid patch field type "newDirectionMixed" for patch ... in field dictionary E.
This error appears thrice for each of 3 patches.

Actually this are not errors but warnings and it appears after blockMesh.
I use directionMixed for field H, and newDirectionMixed for field E.
And problem is that program works, but
it doesn't calculate fields. It remain zero.

Hope someone can give me advise.
Eugene

hjasak · February 7, 2006, 07:31

In the boundary file (and probably in the blockMeshDict if you have used that), the patch thye is specified as "empty". Change the type to "patch" and all will be well.

Enjoy,

Hrv

evgenii · February 7, 2006, 07:44

Thank you, it was my fault!

February 7, 2006, 07:16	Hi everyone. I have some prob	#1
evgenii Member Efimenko Evgenii Join Date: Mar 2009 Location: Nizhnij Novgorod, Russia Posts: 52 Rep Power: 17	Hi everyone. I have some problems with b.c. again. I wrote my own solver and it worked succesfully. But somehow now it returns errors: -Incorrect patch field type "directionMixed" for patch ... Boundary condition specifies 'empty' for field H. This error appears thrice for each of 3 patches. What's the problem with it? And the second error is: -Invalid patch field type "newDirectionMixed" for patch ... in field dictionary E. This error appears thrice for each of 3 patches. Actually this are not errors but warnings and it appears after blockMesh. I use directionMixed for field H, and newDirectionMixed for field E. And problem is that program works, but it doesn't calculate fields. It remain zero. Hope someone can give me advise. Eugene

February 7, 2006, 07:31	In the boundary file (and prob	#2
hjasak Senior Member Hrvoje Jasak Join Date: Mar 2009 Location: London, England Posts: 1,905 Rep Power: 33	In the boundary file (and probably in the blockMeshDict if you have used that), the patch thye is specified as "empty". Change the type to "patch" and all will be well. Enjoy, Hrv __________________ Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk

February 7, 2006, 07:44	Thank you, it was my fault!	#3
evgenii Member Efimenko Evgenii Join Date: Mar 2009 Location: Nizhnij Novgorod, Russia Posts: 52 Rep Power: 17	Thank you, it was my fault!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WARNINGS I don't want to have	Gabriel	Siemens	3	August 10, 2007 17:04
Not to display warnings?	Yasser Nabavi	FLUENT	3	June 4, 2006 08:27
WARNINGS	DB	Siemens	0	January 19, 2006 13:47
Warnings	Dave	Siemens	2	November 9, 2005 21:08
lots of warnings	Arnab	Siemens	2	January 27, 2005 15:36