|
[Sponsors] |
rhoCentralFoam does not allow icoTabulated transport option |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 18, 2022, 04:58 |
rhoCentralFoam does not allow icoTabulated transport option
|
#1 |
New Member
Join Date: Jan 2022
Posts: 1
Rep Power: 0 |
Hello everyone,
I've been using OpenFOAM to build a compressible flow model using the rhoCentralFoam solver. One issue that I found is in the available options for the thermophysicalProperties library. Reading through the documentation, there are 7 options available for the transport key under thermoType. The one I need to use is icoTabulated, as I would like to have the thermal conductivity and viscosity as functions of the temperature, read from a table (which is exactly what icoTabulated does). However, setting up the model in this way and running the solver immediately gives an error (as shown in the attachment), stating that icoTabulated is not a supported transport type. My question is two-fold: - why is this so, in particular because other options, such as polynomial, would allow the specification of a temperature-dependent only property? - is there a way around this, aside from the option of building my own library to implement the properties as I need them? I appreciate any insight and feedback! Thanks. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Difficulty in calculating angular velocity of Savonius turbine simulation | alfaruk | CFX | 14 | March 17, 2017 06:08 |
Wrong multiphase flow at rotating interface | Sanyo | CFX | 14 | February 7, 2017 17:19 |
Error in Two phase (condensation) modeling | adilsyyed | CFX | 15 | June 24, 2015 19:42 |
An error has occurred in cfx5solve: | volo87 | CFX | 5 | June 14, 2013 17:44 |
error message | cuteapathy | CFX | 14 | March 20, 2012 06:45 |