|
[Sponsors] |
December 3, 2008, 03:07 |
Hi
I've used the splitMesh ut
|
#1 |
New Member
Sara Schairer
Join Date: Mar 2009
Posts: 26
Rep Power: 17 |
Hi
I've used the splitMesh utility on my geometry. After I refined the mesh I transferred it back to OpenFoam and wanted to apply splitMesh again. Since I've done it before the procedure has to be correct, only the mesh has changed. This is the error message I get: Create time Create polyMesh for time = 0 Read 94543 faces to split Can not find faces using edge (84572 721599) on cell 81820#0 Foam::error::printStack(Foam:stream&) in "/home/schairer/OpenFOAM/OpenFOAM-1.5/lib/linuxGccDPOpt/libOpenFOAM.so" #1 Foam::error::abort() in "/home/schairer/OpenFOAM/OpenFOAM-1.5/lib/linuxGccDPOpt/libOpenFOAM.so" #2 Foam::meshTools::getEdgeFaces(Foam::primitiveMesh const&, int, int, int&, int&) in "/home/schairer/OpenFOAM/OpenFOAM-1.5/lib/linuxGccDPOpt/libmeshTools.so" #3 __gxx_personality_v0 in "/home/schairer/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/splitMesh" #4 Foam::regionSide::walkAllPointConnectedFaces(Foam: :primitiveMesh const&, Foam::HashSet<int,> > const&, Foam::HashSet<int,> > const&) in "/home/schairer/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/splitMesh" #5 Foam::regionSide::regionSide(Foam::primitiveMesh const&, Foam::HashSet<int,> > const&, Foam::HashSet<int,> > const&, int, int) in "/home/schairer/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/splitMesh" #6 main in "/home/schairer/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/splitMesh" #7 __libc_start_main in "/lib/tls/i686/cmov/libc.so.6" #8 Foam::regIOobject::write() const in "/home/schairer/OpenFOAM/OpenFOAM-1.5/applications/bin/linuxGccDPOpt/splitMesh" From function meshTools::getEdgeFaces(const primitiveMesh&, const label, const label, label&, label& in file meshTools/meshTools.C at line 514. FOAM aborting Does this mean something to anyone? Because I really don't know what to do with this. Hope someone has some suggestions what I could do to get it working. Cheers, Sara |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[mesh manipulation] SplitMesh error messages | ariorus | OpenFOAM Meshing & Mesh Conversion | 4 | September 27, 2019 04:37 |
Exporting the CFX-Mesh to Fluent poblem?? | zaidun | CFX | 0 | April 13, 2006 22:49 |
[Commercial meshers] SplitMesh problem | sbrahim | OpenFOAM Meshing & Mesh Conversion | 0 | April 12, 2005 11:33 |
Poblem with Unsteady for Natural Convection | TK | FLUENT | 0 | March 1, 2005 08:29 |