Tidal simulation with transient boundary (water surface elevation)?

dbazz · March 17, 2022, 20:55

Hello All,

I'm trying to create a simulation of coastal flooding from tide-like events.

The model setup should be a transient boundary condition,
where one wall of the model has an inlet water surface that corresponds to a water surface elevation.

The water surface elevation data is from a NOAA tide buoy and provides water surface elevation in in feet in 6 minute intervals.

Are there any tide or flood models that have a transient boundary condition that I could reference?

I'm not sure how to set this up with U and alpha.

Neshat · March 13, 2023, 05:13

Hi David,

Have you found an answer to your problem?

Thank you in advance

dbazz · March 13, 2023, 14:16

No, I never found any examples. Here is a jupyter notebook that I created for opening a HEC-RAS file and converting the data into time-varying boundary conditions that are saved as alpha.water and U files for different timesteps. This j-notebook answers part of my question but doesn't represent a complete project that uses this information.

Neshat · March 14, 2023, 03:38

Thank you so much for sharing.
I am seeking a way to set time series of water surface elevation as a boundary condition.
Any suggestions from others would be appreciated.

March 17, 2022, 20:55	Tidal simulation with transient boundary (water surface elevation)?	#1
dbazz New Member David Join Date: Dec 2021 Posts: 4 Rep Power: 4	Hello All, I'm trying to create a simulation of coastal flooding from tide-like events. The model setup should be a transient boundary condition, where one wall of the model has an inlet water surface that corresponds to a water surface elevation. The water surface elevation data is from a NOAA tide buoy and provides water surface elevation in in feet in 6 minute intervals. Are there any tide or flood models that have a transient boundary condition that I could reference? I'm not sure how to set this up with U and alpha. Last edited by dbazz; March 17, 2022 at 21:11. Reason: formatting for readability

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Table bounds warnings at: END OF TIME STEP	CFXer	CFX	4	July 16, 2020 23:44
OpenFOAM error	Vinay Kumar V	Main CFD Forum	0	February 20, 2020 09:17
My radial inflow turbine	Abo Anas	CFX	27	May 11, 2018 01:44
Domain Imbalance	HMR	CFX	5	October 10, 2016 05:57
Water vapour condensation in CFX-5.7.1	hdj	CFX	1	November 27, 2005 07:15

March 13, 2023, 05:13		#2
Neshat New Member Neshat Join Date: Feb 2017 Posts: 6 Rep Power: 9	Hi David, Have you found an answer to your problem? Thank you in advance

March 14, 2023, 03:38		#4
Neshat New Member Neshat Join Date: Feb 2017 Posts: 6 Rep Power: 9	Thank you so much for sharing. I am seeking a way to set time series of water surface elevation as a boundary condition. Any suggestions from others would be appreciated.