|
[Sponsors] |
June 16, 2010, 03:10 |
Low Reynolds Modeling
|
#1 |
Member
Moritz Wied
Join Date: Mar 2010
Location: suttgart, germany
Posts: 35
Rep Power: 16 |
Hi Foamers,
after two months without success in getting a LamBremhorst-low-Re-Ke problem (calculate drag coefficient) to work, i hope someone could help me with some experience. - i have a polymesh made with ccm+. - no problems are found by checkmesh. - with inlet velocity 0.1 m/s simpleFoam is running, above k and eps explode after some iterations.. i read you can play with the inlet bc for k and eps.. could someone post his settings for a steadystate flow with simplefoam and high flow velocities? attached are my setting files. All the best, Moritz |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Low Reynolds Number SST Model | Josh | CFX | 41 | June 4, 2023 19:00 |
Low Reynolds Modeling Lam Bremhorst | Mo-ITB | OpenFOAM Running, Solving & CFD | 3 | November 17, 2017 11:07 |
low reynolds number models in Fluent | doug | Main CFD Forum | 6 | August 4, 2012 14:39 |
Multicomponent fluid | Andrea | CFX | 2 | October 11, 2004 05:12 |
Low Reynolds number K-Omega modeling | Athar Zaidi | Main CFD Forum | 0 | October 31, 1999 13:59 |