CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

Error running tutorial pitzDailyExptInlet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 15, 2010, 20:42
Default Error running tutorial pitzDailyExptInlet
  #1
Member
 
Paulo Bufacchi
Join Date: Jun 2010
Posts: 50
Rep Power: 7
Bufacchi is on a distinguished road
Hi All,

Trying to understand how timeVaryingMappedFixedValueFvPatchField works, I decided to go through the tutorial pitzDailyExptInlet. Running blockMesh was ok, but when I ran simpleFoam I got the errors below.

Can someone please guide me through the solution of the error?
I'm using OpenFOAM 1.7.x on OpenSuse 11.3.

Thanks,

Paulo



paulo@linux-592e:~/OpenFOAM/paulo-1.7.x/run/tutorials/incompressible/simpleFoam/pitzDailyExptInlet> blockMesh
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 1.7.x |
| \\ / A nd | Web: www.OpenFOAM.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 1.7.x-c374948d3a92
Exec : blockMesh
Date : Aug 15 2010
Time : 21:31:13
Host : linux-592e
PID : 10287
Case : /home/paulo/OpenFOAM/paulo-1.7.x/run/tutorials/incompressible/simpleFoam/pitzDailyExptInlet
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time


Creating block mesh from
"/home/paulo/OpenFOAM/paulo-1.7.x/run/tutorials/incompressible/simpleFoam/pitzDailyExptInlet/constant/polyMesh/blockMeshDict"


Creating blockCorners

Creating curved edges

Creating blocks

Creating patches

Creating block mesh topology

Default patch type set to empty

Check block mesh topology

Basic statistics
Number of internal faces : 18
Number of boundary faces : 42
Number of defined boundary faces : 42
Number of undefined boundary faces : 0

Checking patch -> block consistency

Creating block offsets

Creating merge list .

Creating points with scale 0.001

Creating cells

Creating patches

Creating mesh from block mesh

Default patch type set to empty

Writing polyMesh

End
paulo@linux-592e:~/OpenFOAM/paulo-1.7.x/run/tutorials/incompressible/simpleFoam/pitzDailyExptInlet> simpleFoam
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 1.7.x |
| \\ / A nd | Web: www.OpenFOAM.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 1.7.x-c374948d3a92
Exec : simpleFoam
Date : Aug 15 2010
Time : 21:31:39
Host : linux-592e
PID : 10291
Case : /home/paulo/OpenFOAM/paulo-1.7.x/run/tutorials/incompressible/simpleFoam/pitzDailyExptInlet
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Reading field p

Reading field U

timeVaryingMappedFixedValueFvPatchField : Read 70 sample points from "/home/paulo/OpenFOAM/paulo-1.7.x/run/tutorials/incompressible/simpleFoam/pitzDailyExptInlet/constant/boundaryData/inlet/points"
timeVaryingMappedFixedValueFvPatchField : Used points (-0.0206 0.000125 0) (-0.0206 0.0252065 0.173) (-0.0206 0.0252065 0) to define coordinate system with normal (-1 0 0)

DTRIS2 - Fatal error!
readSamplePoints : Dumping triangulated surface to triangulation.stl
readSamplePoints : Dumping face centres to "/home/paulo/OpenFOAM/paulo-1.7.x/run/tutorials/incompressible/simpleFoam/pitzDailyExptInlet/localFaceCentres.obj"
timeVaryingMappedFixedValueFvPatchField : In directory "/home/paulo/OpenFOAM/paulo-1.7.x/run/tutorials/incompressible/simpleFoam/pitzDailyExptInlet/constant/boundaryData/inlet" found times
1
(
0
)

findTime : Found time 0 after index:0 time:0
checkTable : Reading startValues from "boundaryData/inlet/0"
#0 Foam::error:rintStack(Foam::Ostream&) in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/lib/linux64GccDPOpt/libOpenFOAM.so"
#1 Foam::sigSegv::sigSegvHandler(int) in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/lib/linux64GccDPOpt/libOpenFOAM.so"
#2 in "/lib64/libc.so.6"
#3 Foam::timeVaryingMappedFixedValueFvPatchField<Foam ::Vector<double> >::interpolate(Foam::Field<Foam::Vector<double> > const&) const in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/lib/linux64GccDPOpt/libfiniteVolume.so"
#4 Foam::timeVaryingMappedFixedValueFvPatchField<Foam ::Vector<double> >::checkTable() in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/lib/linux64GccDPOpt/libfiniteVolume.so"
#5 Foam::timeVaryingMappedFixedValueFvPatchField<Foam ::Vector<double> >::updateCoeffs() in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/lib/linux64GccDPOpt/libfiniteVolume.so"
#6 Foam::timeVaryingMappedFixedValueFvPatchField<Foam ::Vector<double> >::timeVaryingMappedFixedValueFvPatchField(Foam::f vPatch const&, Foam:imensionedField<Foam::Vector<double>, Foam::volMesh> const&, Foam::dictionary const&) in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/lib/linux64GccDPOpt/libfiniteVolume.so"
#7 Foam::fvPatchField<Foam::Vector<double> >::adddictionaryConstructorToTable<Foam::timeVaryi ngMappedFixedValueFvPatchField<Foam::Vector<double > > >::New(Foam::fvPatch const&, Foam:imensionedField<Foam::Vector<double>, Foam::volMesh> const&, Foam::dictionary const&) in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/lib/linux64GccDPOpt/libfiniteVolume.so"
#8 Foam::fvPatchField<Foam::Vector<double> >::New(Foam::fvPatch const&, Foam:imensionedField<Foam::Vector<double>, Foam::volMesh> const&, Foam::dictionary const&) in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/applications/bin/linux64GccDPOpt/simpleFoam"
#9 Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>::GeometricBoundaryField::GeometricB oundaryField(Foam::fvBoundaryMesh const&, Foam:imensionedField<Foam::Vector<double>, Foam::volMesh> const&, Foam::dictionary const&) in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/applications/bin/linux64GccDPOpt/simpleFoam"
#10 Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>::readField(Foam::dictionary const&) in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/applications/bin/linux64GccDPOpt/simpleFoam"
#11 Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>::readField(Foam::Istream&) in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/applications/bin/linux64GccDPOpt/simpleFoam"
#12 Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>::GeometricField(Foam::IOobject const&, Foam::fvMesh const&) in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/applications/bin/linux64GccDPOpt/simpleFoam"
#13
in "/home/paulo/OpenFOAM/OpenFOAM-1.7.x/applications/bin/linux64GccDPOpt/simpleFoam"
#14 __libc_start_main in "/lib64/libc.so.6"
#15
at /usr/src/packages/BUILD/glibc-2.11.2/csu/../sysdeps/x86_64/elf/start.S:116
Segmentation fault
Bufacchi is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tutorial for subcooled nucleate boiling Asghari FLUENT 34 September 27, 2013 04:58
Problem on Fluent Tutorial: Horizontal Film Boilig Feng FLUENT 2 April 13, 2013 05:34
SI engine tutorial error non-positive volumes rackem FLUENT 12 November 22, 2010 09:06
STAR-CD Tutorial shekhar aryal STAR-CD 4 March 22, 2010 04:25
Rotor/stator tutorial, and how to... gilberto CFX 5 January 21, 2002 10:41


All times are GMT -4. The time now is 18:33.