|
[Sponsors] |
July 10, 2011, 11:06 |
problem in ignition
|
#1 |
New Member
emad
Join Date: Jul 2011
Posts: 2
Rep Power: 0 |
Dear all!
a implimented the ignition code for the cylindrical domain for non-premixed flame and used the reactingFoam duration of ignition is 0.001 s and the diameter of igniton is 0.02 i get the following error : FOAM FATAL ERROR: [0] attempt to use janafThermo<equationOfState> out of temperature range 200 -> 5000; T = 5000.26 [0] [0] From function janafThermo<equationOfState>::checkT(const scalar T) const [0] in file /home/emad/OpenFOAM/OpenFOAM-1.7.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 63. [0] FOAM parallel run aborting [0] [0] #0 Foam::error:rintStack(Foam::Ostream&) in "/home/emad/OpenFOAM/OpenFOAM-1.7.1/lib/linux64GccDPOpt/libOpenFOAM.so" [0] #1 Foam::error::abort() in "/home/emad/OpenFOAM/OpenFOAM-1.7.1/lib/linux64GccDPOpt/libOpenFOAM.so" [0] #2 Foam::specieThermo<Foam::janafThermo<Foam:erfect Gas> >::H(double) const in "/home/emad/OpenFOAM/OpenFOAM-1.7.1/lib/linux64GccDPOpt/libreactionThermophysicalModels.so" [0] #3 Foam::ODEChemistryModel<Foam:siChemistryModel, Foam::sutherlandTransport<Foam::specieThermo<Foam: :janafThermo<Foam:erfectGas> > > >::solve(double, double) in "/home/emad/OpenFOAM/OpenFOAM-1.7.1/lib/linux64GccDPOpt/libchemistryModel.so" [0] #4 [0] in "/home/emad/OpenFOAM/OpenFOAM-1.7.1/applications/bin/linux64GccDPOpt/reactingFoam" [0] #5 __libc_start_main in "/lib/libc.so.6" [0] #6 [0] in "/home/emad/OpenFOAM/OpenFOAM-1.7.1/applications/bin/linux64GccDPOpt/reactingFoam" -------------------------------------------------------------------------- MPI_ABORT was invoked on rank 0 in communicator MPI_COMM_WORLD with errorcode 1. NOTE: invoking MPI_ABORT causes Open MPI to kill all MPI processes. You may or may not see output from other processes, depending on exactly when Open MPI kills them. -------------------------------------------------------------------------- -------------------------------------------------------------------------- mpirun has exited due to process rank 0 with PID 7376 on node emad exiting without calling "finalize". This may have caused other processes in the application to be terminated by signals sent by mpirun (as reported here). please help me i want to remover this error |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
area does not match neighbour by ... % -- possible face ordering problem | St.Pacholak | OpenFOAM | 10 | February 7, 2024 21:50 |
conduction problem | venkataramana | OpenFOAM | 3 | December 1, 2013 07:30 |
Problem in implementing cht | tilek | CFX | 3 | May 8, 2011 08:39 |
Adiabatic and Rotating wall (Convection problem) | ParodDav | CFX | 5 | April 29, 2007 19:13 |
Is this problem well posed? | Thomas P. Abraham | Main CFD Forum | 5 | September 8, 1999 14:52 |