|
[Sponsors] |
February 12, 2012, 14:28 |
decomposePar failed in "field transfer"
|
#1 |
Member
Aqua
Join Date: Oct 2011
Posts: 96
Rep Power: 14 |
Dear all,
I am trying to run a case in parallel, when run "decomposePar", it worked fine before "field transfer". no error, on warning, but just stopped..as follows: Processor 15 Number of cells = 30270 Number of faces shared with processor 12 = 420 Number of faces shared with processor 14 = 1096 Number of faces shared with processor 8 = 343 Number of faces shared with processor 10 = 551 Number of processor patches = 4 Number of processor faces = 2410 Number of boundary faces = 8475 Number of processor faces = 10809 Max number of processor patches = 7 Max number of faces between processors = 2410 Processor 0: field transfer Initializing the GGI interpolator between master/shadow patches: iminy/imaxy Initializing the GGI interpolator between master/shadow patches: ominy/omaxy it just stopped here, without finishing the decomposePar. The result is, in processor0/1/2/3/4/5... there is only the file "constant", but no file "0".. Does anyone may help on this? what may be the problem? Thank you so much!! Aqua |
|
February 12, 2012, 22:53 |
|
#2 |
Member
Abhishek
Join Date: Dec 2010
Posts: 39
Rep Power: 15 |
Hi,
That means you don't have the initial conditions folder named "0". If you are using different time for initial condition, try changing the start time in controlDict. |
|
February 14, 2012, 06:00 |
|
#3 |
Member
Aqua
Join Date: Oct 2011
Posts: 96
Rep Power: 14 |
Hello, Abhishek,
Thank you so much for your reply. Turned out that the mesh is not right. So current I am trying to modify the mesh... Cheers! Aqua |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Transient boundary conditions | Jarrod Sinclair (Sinclair) | OpenFOAM Running, Solving & CFD | 133 | May 6, 2015 06:21 |
DeardorffDiffStress turbulence model | Zuixy | OpenFOAM Running, Solving & CFD | 0 | November 14, 2011 08:44 |
[OpenFOAM] ParaView/Parafoam error when making animation | Disco_Caine | ParaView | 6 | September 28, 2010 09:54 |
user subroutine error | CFDUSER | CFX | 2 | December 9, 2006 06:31 |
user defined function | cfduser | CFX | 0 | April 29, 2006 10:58 |