Negative absolute pressure in rhoPorousMRFSimpleFoam -- CFD Online Discussion Forums

January 9, 2013, 06:51		#7
niklas Super Moderator Niklas Nordin Join Date: Mar 2009 Location: Stockholm, Sweden Posts: 693 Rep Power: 29	you have a massflow as inlet bc and you are running a 2D case, so my question is then if the value of the massflow is specified in kg/s/m or in kg/s and if the width of the channel is 1 meter or just 'thin' because that will matter. remember that the area of the inlet will be the actual area used when calculating the inlet velocity doubtsincfd likes this.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Negative Absolute Pressure	mike	FLUENT	8	December 18, 2014 03:50
Manifold Absolute Pressure in Engine Simulations	abminternet	OpenFOAM	4	July 4, 2011 11:45
seeking for help about a room with negative pressure	mengyue1	FLUENT	0	November 26, 2009 06:40
negative static pressure	Selo melo	FLUENT	5	December 18, 2006 09:30
avoiding negative absolute pressure!!!	Tania	FLUENT	8	March 30, 2004 18:41

All times are GMT -4. The time now is 15:06.