A document on Rhie-Chow interpolation in OpenFOAM

sharonyue · March 17, 2016, 03:18

Hi guys,

I write a English document about "Rhie-Chow interpolation in OpenFOAM". Although it is such an old tech to avoid check-board pressure and had been discussed massively else where. Well, I tried to explained it in a very very simple way.

Because my primary language is not English, sometimes the formal scientific writing is tough..so any kind of correction is welcomed to improve this document! Including equation, grammar, typos.

Check it here:http://www.dyfluid.com/RhieChow-en.html

BTW, you can see its a very short document. Much much appreciated that someone can help me to correct the grammar thing directly on the html.file.

vatavuk · March 18, 2016, 09:56

Hi Donqyue,

Just to check: Have you seen the material in this link
http://www.tfd.chalmers.se/~hani/kur...7/rhiechow.pdf

Best Regards,
Paulo

sharonyue · March 18, 2016, 10:09

Hi Paulo,

Yeah, I have seen that one.

Actually the reason why I wrote that document is that someone asked me to explain more about Rhie-Chow interpolation in OpenFOAM after he read Fabian's document. So I think my document is a good supplementary to Fabian's. You can see that I tried to explain it in a different way.

Its good that you add Fabian's link here, so there are two documents on this subject.

Best,

MMRC · March 21, 2024, 05:17

Hi , Dongyue Li
Could you share your report? it is not accesible
Thank you,

March 17, 2016, 03:18	A document on Rhie-Chow interpolation in OpenFOAM	#1
sharonyue Senior Member Dongyue Li Join Date: Jun 2012 Location: Beijing, China Posts: 838 Rep Power: 17	Hi guys, I write a English document about "Rhie-Chow interpolation in OpenFOAM". Although it is such an old tech to avoid check-board pressure and had been discussed massively else where. Well, I tried to explained it in a very very simple way. Because my primary language is not English, sometimes the formal scientific writing is tough..so any kind of correction is welcomed to improve this document! Including equation, grammar, typos. Check it here:http://www.dyfluid.com/RhieChow-en.html BTW, you can see its a very short document. Much much appreciated that someone can help me to correct the grammar thing directly on the html.file. __________________ My OpenFOAM algorithm website: http://dyfluid.com By far the largest Chinese CFD-based forum: http://www.cfd-china.com/category/6/openfoam We provide lots of clusters to Chinese customers, and we are considering to do business overseas: http://dyfluid.com/DMCmodel.html

March 18, 2016, 10:09		#3
sharonyue Senior Member Dongyue Li Join Date: Jun 2012 Location: Beijing, China Posts: 838 Rep Power: 17	Hi Paulo, Yeah, I have seen that one. Actually the reason why I wrote that document is that someone asked me to explain more about Rhie-Chow interpolation in OpenFOAM after he read Fabian's document. So I think my document is a good supplementary to Fabian's. You can see that I tried to explain it in a different way. Its good that you add Fabian's link here, so there are two documents on this subject. Best, __________________ My OpenFOAM algorithm website: http://dyfluid.com By far the largest Chinese CFD-based forum: http://www.cfd-china.com/category/6/openfoam We provide lots of clusters to Chinese customers, and we are considering to do business overseas: http://dyfluid.com/DMCmodel.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM.org] A Mac OS X of23x Development Environment Using Docker	rt08	OpenFOAM Installation	1	February 28, 2016 19:00
Cross-compiling OpenFOAM 1.7.0 on Linux for Windows 32 and 64bits with Mingw-w64	wyldckat	OpenFOAM Announcements from Other Sources	3	September 8, 2010 06:25
Rhie - Chow Interpolation ?	Javier Goicochea	Main CFD Forum	0	November 27, 2003 18:01
Rhie - Chow speed up factors	Goicox	Main CFD Forum	0	November 22, 2003 00:00
Rhie & Chow interpolation	Barry	Main CFD Forum	3	January 20, 2003 09:11

March 18, 2016, 09:56		#2
vatavuk Senior Member Paulo Vatavuk Join Date: Mar 2009 Location: Campinas, Brasil Posts: 196 Rep Power: 17	Hi Donqyue, Just to check: Have you seen the material in this link http://www.tfd.chalmers.se/~hani/kur...7/rhiechow.pdf Best Regards, Paulo

March 21, 2024, 05:17		#4
MMRC Member María Rosales Join Date: Mar 2023 Location: Spain Posts: 35 Rep Power: 3	Hi , Dongyue Li Could you share your report? it is not accesible Thank you,