|
[Sponsors] |
Problem with steadyState solvers using pressure BC |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 9, 2009, 08:41 |
Problem with steadyState solvers using pressure BC
|
#1 |
New Member
Victor Fleischer
Join Date: Nov 2009
Posts: 21
Rep Power: 16 |
Hi at all,
i have a problem, trying to reach a steadyState for my Case. It is quite similar to the MultiRegionHeater Tutorial Case. I fixed the pressure on the Inlet and the Outlet (fixedValue 1e5) and set the Velocity to zeroGradient on the Inlet and Outlet. I tried different Solvers (rhoSimpleFoam, buoyantSimpleFoam) but always the problem occured, that the pressure Equation could not be solved properly. The residuals rised instead of converging...... Doas anybody know how to handle this? Perhaps the problem is, that on the other boundaries i don't have a buoyantPressure BC as in the tutorial case!? Victor |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pressure force calculation in incompressible solvers | philippose | OpenFOAM Running, Solving & CFD | 10 | December 7, 2019 04:51 |
problem with static pressure | Nina | FLUENT | 3 | February 28, 2008 13:08 |
a problem in calculating pressure drop in Fluent? | yu chun | FLUENT | 1 | May 18, 2004 03:40 |
pressure outlet problem | chanchala | FLUENT | 2 | November 5, 2003 06:59 |
pressure gradient term in low speed flow | Atit Koonsrisuk | Main CFD Forum | 2 | January 10, 2002 10:52 |