CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

Increasing chtMultiRegionFoam Fluid Temperature

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 28, 2010, 15:11
Default Increasing chtMultiRegionFoam Fluid Temperature
  #1
Member
 
Matt
Join Date: Jun 2010
Location: Texas
Posts: 31
Rep Power: 7
m.nichols19 is on a distinguished road
Hello and thanks in advance!

I am attempting to model air flowing through a steel pipe using the chtMultiRegionFoam solver. I simplified the problem by making the temperatures of the air and pipe 300 K; however, the temperature of the air still increases as the simulation progresses.

Does anyone know why the temperature of the air would do this?
m.nichols19 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
plot temperature vs time in paraview - chtMultiRegionFoam phsieh2005 OpenFOAM Paraview & paraFoam 2 March 16, 2014 07:50
plot bulk temperature of fluid mohammadkm FLUENT 4 December 13, 2011 16:37
chtMultiRegionFoam case - temperature too high phsieh2005 OpenFOAM Running, Solving & CFD 0 April 24, 2010 08:53
error using combination of step function xujjun CFX 1 January 15, 2008 17:46
fluid structure interaction taru agrawal FLUENT 4 September 10, 2007 03:12


All times are GMT -4. The time now is 12:06.