vacuum model

hyperion · November 6, 2010, 14:10

Hi There DSMC folk -

I was thinking about trying to modify one of the wall interaction models to make it a vacuum boundary. I don't have a lot of c++ experience, but in a Fortran90 dsmc code that I have used there was a wall interaction model that basically just a removed a user specified percentage of incident particles while the rest were reflected back according to the wall model (specular or diffuse).

Does it seem possible to just "delete" a percentage or all incident cloud particles? Any thoughts on how this could be implemented?

Thanks.

ivan_cozza · January 25, 2011, 03:27

Hi Hyperion,
I'm not an expert of DSMC (I did some work on it some years ago with Bird's code DS2V, but I didn't used it anymore for years), but it seems that your proposal should be ok.
In particular, it would be possible to modify the specular reflection model in order to remove a quantity of parcels sufficient to obtain a certain number density rhoN, while velocity and temperature (read, energy) are fixed from the interior. Maybe in this way it could be possible to fix a certain number density, and then a certain pressure.
A vacuum boundary means pressure = 0, so you have just to remove all the parcels, I think.

Did you success to implement sucha a modified bc?

Thanks, Ivan

November 6, 2010, 14:10	vacuum model	#1
hyperion Member Daniel Join Date: Jul 2010 Location: California Posts: 39 Rep Power: 15	Hi There DSMC folk - I was thinking about trying to modify one of the wall interaction models to make it a vacuum boundary. I don't have a lot of c++ experience, but in a Fortran90 dsmc code that I have used there was a wall interaction model that basically just a removed a user specified percentage of incident particles while the rest were reflected back according to the wall model (specular or diffuse). Does it seem possible to just "delete" a percentage or all incident cloud particles? Any thoughts on how this could be implemented? Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Centrifugal Pump and Turbulence Model	Michiel	CFX	12	January 25, 2010 03:20
Problems bout CFD model of biomass gasification, Downdraft gasifier	wanglong	FLUENT	2	November 25, 2009 23:27
Reynolds Stress model in CFX vs Fluent	Tim	CFX	1	October 7, 2009 06:19
help for different between les model (subgrid-scale model)	liuyuxuan	FLUENT	1	October 2, 2009 15:25
Grid resolution for full-scale and down scaled model	gravis	Main CFD Forum	0	October 2, 2009 10:27

January 25, 2011, 03:27		#2
ivan_cozza Senior Member Ivan Flaminio Cozza Join Date: Mar 2009 Location: Torino, Piemonte, Italia Posts: 210 Rep Power: 18	Hi Hyperion, I'm not an expert of DSMC (I did some work on it some years ago with Bird's code DS2V, but I didn't used it anymore for years), but it seems that your proposal should be ok. In particular, it would be possible to modify the specular reflection model in order to remove a quantity of parcels sufficient to obtain a certain number density rhoN, while velocity and temperature (read, energy) are fixed from the interior. Maybe in this way it could be possible to fix a certain number density, and then a certain pressure. A vacuum boundary means pressure = 0, so you have just to remove all the parcels, I think. Did you success to implement sucha a modified bc? Thanks, Ivan