[ImmersedBoundary] Immersed boundary method, again...

kekko · February 22, 2011, 05:06

Hi all,
I intend to simulate FSI cases with the solid being a rubber-like material such as silicon and biological tissue-like objects. Anything that is capable of getting deformed to a significant extent, basically. In order to do so I reckon that something on the line of the original Peskin's Immersed boundary method would be perfect to start off with.

I read somewhere that the immersed boundary method is/was being coded in OF. I've been searching for updates on the topic and I see that the issue has been raised a couple of times in the past months in this forum, but the previous threads seem to have died out pretty quickly. I am thus asking, before I start coding it myself, whether anyone is aware of any development.

thanks everyone.

elvis · February 22, 2011, 07:13

Hi,

http://www.extend-project.de/
in the ROADMAP section you will find
In development:
block-matrix and block solver support
immersed boundary method (Uni Zagreb)
=> Therefore I would contact Zeljko Tukovic or Hrvoje Jasak they are the developer of immersed boundary method

did you have a look at 1.6-extend? Maybe code is included

kekko · February 22, 2011, 07:58

hello mate,
and thanks for the tip.
1.6-ext doesn't appear to have anything related to this right now...unless I am checking in the wrong place.

elvis · February 22, 2011, 08:10

http://www.sfbtrr75.de/website/index...mid=30&lang=de

=>Tuković
- Immersed boundary method with RBF (Radial Basis Function) interpolation in OpenFOAM

kekko · February 22, 2011, 11:39

well done! so it's true.
I'll check whether I can get any additional info.
Thanks for now, you've been really helpful.

February 22, 2011, 05:06	Immersed boundary method, again...	#1
kekko New Member Francesco Serchi Join Date: Feb 2011 Posts: 3 Rep Power: 15	Hi all, I intend to simulate FSI cases with the solid being a rubber-like material such as silicon and biological tissue-like objects. Anything that is capable of getting deformed to a significant extent, basically. In order to do so I reckon that something on the line of the original Peskin's Immersed boundary method would be perfect to start off with. I read somewhere that the immersed boundary method is/was being coded in OF. I've been searching for updates on the topic and I see that the issue has been raised a couple of times in the past months in this forum, but the previous threads seem to have died out pretty quickly. I am thus asking, before I start coding it myself, whether anyone is aware of any development. thanks everyone.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3D Windturbine simulation in SU2	k.vimalakanthan	SU2	15	October 12, 2023 05:53
Wind turbine simulation	Saturn	CFX	58	July 3, 2020 01:13
implementation of the Immersed Boundary Method	mi_cfd	Main CFD Forum	19	April 24, 2019 01:24
[ImmersedBoundary] Immersed Boundary Method	DoQuocVu	OpenFOAM Community Contributions	11	July 13, 2018 09:36
Question about adaptive timestepping	Guille1811	CFX	25	November 12, 2017 17:38

February 22, 2011, 07:13		#2
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hi, http://www.extend-project.de/ in the ROADMAP section you will find In development: block-matrix and block solver support immersed boundary method (Uni Zagreb) => Therefore I would contact Zeljko Tukovic or Hrvoje Jasak they are the developer of immersed boundary method did you have a look at 1.6-extend? Maybe code is included

February 22, 2011, 07:58		#3
kekko New Member Francesco Serchi Join Date: Feb 2011 Posts: 3 Rep Power: 15	hello mate, and thanks for the tip. 1.6-ext doesn't appear to have anything related to this right now...unless I am checking in the wrong place.

February 22, 2011, 08:10		#4
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	http://www.sfbtrr75.de/website/index...mid=30&lang=de =>Tuković - Immersed boundary method with RBF (Radial Basis Function) interpolation in OpenFOAM

February 22, 2011, 11:39		#5
kekko New Member Francesco Serchi Join Date: Feb 2011 Posts: 3 Rep Power: 15	well done! so it's true. I'll check whether I can get any additional info. Thanks for now, you've been really helpful.