thermo-acoustic instability in pre-mixed combustion

newOFuser · May 6, 2011, 12:06

Hello,

I am a new user of OpenFOAM, and would like to study thermo-acoustic instability in premixed combustion.

I saw that one of the solvers for pre-mixed combustion is XiFoam. Can it be used for the purpose above? Where can I see the code where the combustion, and acoustic calculations are performed?
Is there a tutorial case that studies thermo-acoustic interactions?

Thank you very much!
amit

Farshad_Noravesh · May 17, 2011, 04:54

Hi,

As far as i know, i have not seen any LES simulation to obtain flame transfer function for thermoacoustic simulations.
I am trying to do it , and i am trying to use GroovyBC for timevarying velocity inlets.

Kind Regards,

Farshad

newOFuser · October 17, 2012, 11:17

Hi Farshad,

Were you able to calculate the flame transfer function? How did you define and compute it?

PS: I came across some work that determines the volumetric heat release (we can use domainIntegrate) and area average velocity (patchAvergae could be used here). The TF can then be determined, and so I'm trying to implement this.
Would you be kind enough to let me know how you determine FTF?
Also, should the volumetric heat release be calculated over entire volume of combustion chamber, or just the flame volume?

Thanks,
Amit

May 6, 2011, 12:06	thermo-acoustic instability in pre-mixed combustion	#1
newOFuser Member ak Join Date: May 2011 Posts: 64 Rep Power: 14	Hello, I am a new user of OpenFOAM, and would like to study thermo-acoustic instability in premixed combustion. I saw that one of the solvers for pre-mixed combustion is XiFoam. Can it be used for the purpose above? Where can I see the code where the combustion, and acoustic calculations are performed? Is there a tutorial case that studies thermo-acoustic interactions? Thank you very much! amit Hassan_CFD likes this.

May 17, 2011, 04:54	XiFoam can handle it	#2
Farshad_Noravesh Member Farshad Join Date: Oct 2010 Posts: 76 Rep Power: 15	Hi, As far as i know, i have not seen any LES simulation to obtain flame transfer function for thermoacoustic simulations. I am trying to do it , and i am trying to use GroovyBC for timevarying velocity inlets. Kind Regards, Farshad

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modelling Combustion in Porous Zone	tanjinjack	FLUENT	2	September 26, 2016 04:10
On Combustion Instability	liqiang	Main CFD Forum	1	January 29, 2012 13:50
combustion thermo file	dram	Main CFD Forum	1	September 9, 2009 08:37
Combustion Instability in Gas Turbine Combustors	yoyo	FLUENT	4	March 16, 2008 06:39
COMBUSTION INSTABILITY	LORENZO	Main CFD Forum	0	December 6, 2004 09:25

October 17, 2012, 11:17		#3
newOFuser Member ak Join Date: May 2011 Posts: 64 Rep Power: 14	Hi Farshad, Were you able to calculate the flame transfer function? How did you define and compute it? PS: I came across some work that determines the volumetric heat release (we can use domainIntegrate) and area average velocity (patchAvergae could be used here). The TF can then be determined, and so I'm trying to implement this. Would you be kind enough to let me know how you determine FTF? Also, should the volumetric heat release be calculated over entire volume of combustion chamber, or just the flame volume? Thanks, Amit